Key Facts
- Rubber-coated magnetic base — grips at any angle without scratching finished surfaces
- 3-inch stainless steel bowl — holds nuts, bolts, and clips within reach
- Weighs 0.18 lbs — light enough to reposition as the job moves
- Laser etching — a permanent, recessed mark in the steel's own tone
- Digital decal — full-color artwork applied to the bowl's surface
Description
This mini accessory bowl is a 3-inch stainless steel dish with a 1.625-inch magnet on the bottom. The rubber-coated magnetic base grips at any angle and keeps the bowl from scratching finished surfaces, so it holds small parts at the desk, on the bench, or under the hood.
The stainless steel body wipes clean and stands up to daily handling, keeping the bowl presentable on a work surface. At 0.18 lbs, it stays light enough to move from one spot to the next as the task changes.
Your artwork lands on the bowl's surface in one of two ways: laser etched into the steel for a permanent, recessed mark, or printed as a full-color digital decal. Both put your mark on a tool that stays within reach.
Specifications
| Material | Stainless Steel |
|---|---|
| Dimensions | 3.00" x 1.10" |
| Weight | 0.18 lbs |
Decoration & Imprint
3 methods
Your mark is placed on the bowl's surface. Laser etching cuts a permanent, recessed mark in the steel's own tone, while a digital decal applies full-color artwork to the surface. Choose laser for single-tone logos and fine line work, or the digital decal when the artwork depends on full color and detail.
Laser1 location included · one-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Digital DecalFull-color imprint · 1 location included · one-time setup $55.00
A digital decal prints your design — including photographs, gradients, and fine multicolor artwork — onto adhesive vinyl or film, which is then applied cleanly to the product. Because it is printed digitally, every copy is identical edge to edge, and no heat or curing step is pressed into the product itself.
Heat Transfer — Domed DecalFull-color imprint · 1 location included · one-time setup $55.00
Domed Decal (also doming or 3D resin label): a full-color printed adhesive label finished with a clear polyurethane resin that cures into a raised dome over the artwork. The result is a lens-like gloss surface with real physical depth — saturated color sealed against scratches, moisture, and UV fading. Color renders as a full-color process blend that comes close to brand-color references but does not match exact spot inks.
Production & Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $3.62 each, 250–499 pieces $3.50 each, 500–999 pieces $3.38 each, 1,000–5,000 pieces $3.22 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser (1 location included · one-time setup $55.00); Digital Decal (Full-color imprint · 1 location included · one-time setup $55.00); Heat Transfer — Domed Decal (Full-color imprint · 1 location included · one-time setup $55.00).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/197640.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: AER0000249IN STOCK
SKU: AER0000249
Mini Magnetic Accessory Bowl, 3-Inch Stainless Steel
Starting At$3.22each, imprint included — one-time setup charged separately
A practical branded item for homeowners, home-improvement promotions, and client gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!