Key Facts
- Wireless speaker — Bluetooth® 5.3 technology pairs with your device from up to 32 feet away.
- Three LED light settings — bright white light in low, medium and high.
- Eight soothing sounds — brook noise, bird chirp, forest bird, white noise, ocean wave, rainy day, wind and fireside.
- 1,800 mAh lithium ion battery — approximately 3 hours charging time and approximately 5 hours of play time at full volume and full charge.
- Type-C input — charging cord included.
Description
This mini lamp combines a wireless Bluetooth® 5.3 speaker and a sound machine in one tabletop unit. The body is made of bamboo and ABS with a fabric grille, and a bright white LED light offers three settings — low, medium and high. Eight soothing sounds are available: brook noise, bird chirp, forest bird, white noise, ocean wave, rainy day, wind and fireside. Push buttons power the unit on and off and change settings, and the speaker pairs from up to 32 feet away.
An included Type-C cord charges the 1,800 mAh lithium ion battery. Charging time is approximately 3 hours, and play time at full volume and full charge is approximately 5 hours. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
Specifications
| Material | Bamboo & ABS with fabric grille |
|---|---|
| Dimensions | 4.5 in depth x 4 in width x 6 in height |
| Weight | 1.25 lb |
| Battery | 1,800 mAh lithium ion |
| Compatibility | Bluetooth® 5.3 |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Laser decoration is available for this product.
Laser1 location included · one-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 10 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 10–19 pieces $36.10 each, 20–49 pieces $34.88 each, 50–99 pieces $33.74 each, 100–249 pieces $32.17 each, 250–5,000 pieces $30.74 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $100.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (1 location included · one-time setup $100.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0014061IN STOCK
SKU: HTP0014061
Mini Lamp With Speaker & Sound Machine
Starting At$30.74each, imprint included — one-time setup charged separately
Great for trade shows, conference swag and onboarding kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!