Key Facts
- 600D water-resistant polyester
- Unzips into a garment organizer
- Built-in 37" USB cord — connects to an outside charging port; power bank is not included.
- Padded laptop compartment — accommodates most tablets and laptops up to 15".
- Folds flat — for easy storage.
Description
Design
The BrandCharger travel backpack is made of 600D water-resistant polyester. Unzip it to transform it into a garment organizer. It has a double-zippered main compartment, adjustable padded shoulder straps with storage loops, a padded back with a zippered pocket, and two expanding side pockets. The backpack folds flat for easy storage.
Storage and Charging
Inside, a padded laptop compartment with multiple pockets accommodates most tablets and laptops up to 15". A 37" USB cord runs from inside the bag to an outside charging port; a power bank is not included. A trolley sleeve and reflective elements are also featured.
Care
Spot clean and air dry.
Specifications
| Brand | BrandCharger |
|---|---|
| Material | 600D water-resistant polyester |
| Dimensions | 13.5" W x 6.5" D x 18" H |
| Weight | 0.85 lb |
| Pockets | Two expanding side pockets; zippered back pocket; laptop compartment with multiple interior pockets |
| Strap | Adjustable padded shoulder straps with storage loops |
| Care | Spot clean; air dry |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Deboss and Laser are available for this backpack.
Deboss1 location included · one-time setup $50.00
Debossing presses your design into the material with a heated die, displacing the surface to leave a recessed impression below the surrounding plane. No ink, no added color. The mark is the substrate itself — a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker; bold logos and simple type carry well, while intricate detail rounds and loses definition.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 10 pieces with Deboss.
- How much does it cost per unit?
- 10–5,000 pieces $42.63 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $50.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Deboss (1 location included · one-time setup $50.00); Laser (one-time setup $100.00).
From our decoration and product guides
- What does a debossed logo look like?
- Debossing presses the design into the material with a heated die, leaving a recessed impression below the surrounding surface. There is no ink and no added color: the mark is the material itself, a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker. More about Debossed →
- Can a deboss include color or fine detail?
- No. Because nothing is added, debossing reproduces shape but not color, and the displaced material rounds the edges of fine lines, small text and gradients. Reserve it for bold, simple logos and type where a subtle, tactile impression carries the branding. For a printed ink color choose pad print or screen print; for crisp, permanent fine detail on a hard surface choose laser engraving. More about Debossed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0010421IN STOCK
SKU: HTP0010421
BrandCharger Travel Backpack
Starting At$42.63each, imprint included — one-time setup charged separately
A practical option for travel, trade shows and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!