Key Facts
- Double-wall 18/8 stainless steel — vacuum insulated to keep drinks cold for 24 hours or hot for 12
- FDA compliant and BPA free — safe for everyday hydration
- Screw-top acacia wood lid — natural wood accent with a stainless steel band
- Braided carry handle — two-tone polyester with an acacia wood peg
Description
Built for the Outdoors
The Manna™ 18 oz. Ascend water bottle is crafted from double-wall 18/8 stainless steel with vacuum insulation, keeping your drinks cold for 24 hours or hot for 12. Its screw-top acacia wood lid and braided carry handle with an acacia wood peg add a natural, tactile touch that stands up to daily use.
Safe and Ready to Personalize
This bottle is FDA compliant and BPA free, making it a safe choice for water, tea, or coffee. The stainless steel surface accepts laser etching for a permanent, recessed mark that won't wear off, ensuring your brand stays visible through every hike, workout, or commute.
A Gift That Goes the Distance
Whether you're rewarding employees or thanking clients, the Ascend bottle is a practical, durable gift that fits an active lifestyle. Its lightweight design and easy-to-carry handle make it a favorite for travel, fitness, and outdoor adventures.
Specifications
| Brand | Manna |
|---|---|
| Material | 18/8 Stainless Steel |
| Capacity | 18 oz. |
| Dimensions | 2.62" D x 2.62" W x 9.94" H |
| Weight | 0.88 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your logo is laser etched into the front face of the bottle, creating a permanent, recessed mark in the stainless steel's own tone. For artwork needing color, screen printing applies crisp, opaque ink directly onto the surface.
Laser — laserX (branded)one-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $62.50 · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laserone-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
6 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 6 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser — laserX (branded).
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $29.99 each, 48–95 pieces $28.96 each, 96–239 pieces $27.99 each, 240–5,000 pieces $26.66 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order.
- How long does production take?
- Production takes 6 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser — laserX (branded) (one-time setup $62.50); Screen Print (1 color/location included · one-time setup $62.50 · Up to 1 color); Laser (one-time setup $62.50).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0001218IN STOCK
SKU: LGK0001218
Manna™ 18 oz. Ascend Stainless Steel Water Bottle with Acacia Lid
Starting AtWas $27.81 Now $26.66each
A natural choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!