Key Facts
- 15W output — wireless charging power.
- Built-in Type-C cable
- Aluminum alloy — the charger's listed material.
- Monitor mounting — adheres to the back of a laptop or desktop monitor and swivels closed when not in use.
- Magnetic alignment — internal magnets align iPhone® 12 and newer; a compatible phone case is required, otherwise remove the case.
Description
A wireless charger that adheres to the back of a laptop or desktop monitor with strong adhesive and swivels closed when not in use. It has an aluminum alloy body, a 15W output, and a built-in Type-C cable.
A magnetic pad keeps the phone in place, and internal magnets help align it for wireless charging on iPhone® 12 and newer. The magnetic pad requires a compatible phone case; otherwise, remove the case to use. iPhone® is a trademark of Apple Inc., registered in the U.S. and other countries.
Specifications
| Material | Aluminum alloy |
|---|---|
| Dimensions | 2.25 in W x 5.00 in H |
| Weight | 0.18 lb |
| Compatibility | iPhone® 12 and newer for magnetic alignment |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Pad Print and Laser are available.
Pad PrintPMS1 color/location included · one-time setup $40.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Pad Print.
- How much does it cost per unit?
- 25–5,000 pieces $17.02 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $40.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (1 color/location included · one-time setup $40.00 · Up to 1 color); Laser (one-time setup $100.00).
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0013485IN STOCK
SKU: HTP0013485
Monitor Mount Wireless Charger
Starting At$17.02each, imprint included — one-time setup charged separately
Suited to trade shows, onboarding kits, and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!