Key Facts
- Laser-etched branding — etched into the surface for a permanent, recessed mark
- Leather and metal construction — brass- or nickel-plated zinc base with a leather top
- Cork base — protects surfaces from scratches and moisture
Description
Materials and Craft
The JAFFA® Leather Coaster pairs a genuine leather top with a brass- or nickel-plated zinc base, giving it a refined look that stands up to daily use. The cork underside keeps the coaster in place and protects your table from scratches and moisture.
Branding
Your logo is laser etched into the leather surface, creating a permanent, recessed mark that holds fine lines and small text crisply. The mark carries no ink, so it shows the leather's own tone for a subtle, dimensional brand impression.
Use
This coaster suits a range of settings, from office desks to home bars. Its durable materials and classic design make it a practical choice for everyday use.
Specifications
| Brand | JAFFA |
|---|---|
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your logo is laser etched into the leather top of the coaster, creating a permanent, recessed mark in the material's own tone. For bold, simple logos, debossing offers a pressed, ink-free impression, while foil stamping adds a reflective metallic finish in one color.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Debossno setup charge
Debossing presses your design into the material with a heated die, displacing the surface to leave a recessed impression below the surrounding plane. No ink, no added color. The mark is the substrate itself — a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker; bold logos and simple type carry well, while intricate detail rounds and loses definition.
Foil StampPMSno setup charge · 1 color
Foil stamping (hot stamping) presses a thin metallic foil onto the surface with a heated metal die, bonding it where the die makes contact and leaving a shallow pressed-in impression. The mark reads as a single reflective metallic tone: it throws light at some angles and darkens to an outline of itself at others, giving the logo depth against the base. Solid shapes and bold lettering hold cleanly; very fine lines and small text can soften as the foil seats under pressure.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 25–49 pieces $18.22 each, 50–99 pieces $17.60 each, 100–499 pieces $17.01 each, 500–5,000 pieces $16.20 each. Prices are per unit.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (no setup charge); Deboss (no setup charge); Foil Stamp (no setup charge · 1 color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a debossed logo look like?
- Debossing presses the design into the material with a heated die, leaving a recessed impression below the surrounding surface. There is no ink and no added color: the mark is the material itself, a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker. More about Debossed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0001574IN STOCK
SKU: BCC0001574
JAFFA® Leather Coaster with Metal Base
Starting AtWas $16.85 Now $16.20each
A natural choice for client gifts, employee gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!