Key Facts
- Triple vacuum insulation — stainless steel walls slow temperature change in the drink
- Screw-on black ring — secures a bottle or a 12 oz. can in the same body
- Drop-in spill-resistant lid — clear plastic lid with a slider opening
- Fits most cup holders — sized for the car console
- 13 oz. to the rim — 12 oz. with the lid on
Description
The Koozie® Triple Vacuum Tumbler is a 13 oz. stainless steel vessel built around a screw-on black ring. With just the ring, it holds a bottle or a 12 oz. can; drop in the clear spill-resistant plastic lid with its slider opening and it becomes an on-the-go tumbler for coffee or an ice-cold drink. Triple vacuum insulation between the 304 stainless steel outer and inner walls slows temperature change, so the drink stays closer to how it was poured.
The body is sized to fit most cup holders, which keeps it within reach on commutes and at a desk. Its 13 oz. capacity is measured to the rim, or 12 oz. with the lid on, so the fill line is easy to judge. The design carries U.S. Patent No. D927,934.
Specifications
| Brand | Koozie |
|---|---|
| Material | Stainless Steel Grade 304 S/S outer and inner |
| Capacity | 13 oz. to the rim; 12 oz. with lid on |
| Dimensions | 5.125 in. height |
| Origin | Imported, decorated in USA |
Decoration & Imprint
5 methods
Your artwork is applied to the body of the tumbler. Full Color lays down photographic, gradient, or many-color artwork; Laser etches a permanent, recessed mark in the material's own tone; Screen Print applies crisp, opaque spot-color artwork on top of the surface; and Digital Print — Personalization changes names, numbers, or images per piece within a single run. Choose Full Color or Digital Print — Personalization when the artwork depends on tonal reproduction, Laser for single-tone logos and fine line work, and Screen Print for bold spot-color shapes and simple lettering.
Full ColorPMSone-time setup $55.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Laserone-time setup $110.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen PrintPMS1 color/location included · one-time setup $55.00 · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laser — Personalizationone-time setup $55.00
Digital Print — PersonalizationPMSone-time setup $55.00 · Full color
Personalization uses variable-data digital printing (VDP) — names, numbers, text, barcodes, photos, or graphics change per piece within the same run while the surrounding layout stays fixed. The result is a smooth, flat full-color print with no raised texture, reproducing photos, gradients, and fine type cleanly. Brand hues render as a close full-color process simulation rather than an exact spot match.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $18.16 each, 48–71 pieces $17.53 each, 72–143 pieces $16.95 each, 144–287 pieces $16.14 each, 288–5,000 pieces $15.41 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Full Color (one-time setup $55.00 · Full color); Laser (one-time setup $110.00); Screen Print (1 color/location included · one-time setup $55.00 · Up to 1 color); Laser — Personalization (one-time setup $55.00); Digital Print — Personalization (one-time setup $55.00 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0001964IN STOCK
SKU: BCC0001964
Koozie® Triple Vacuum Tumbler, 13 oz. Stainless Steel
Starting At$15.41each, imprint included — one-time setup charged separately
A practical pick for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!