Key Facts
- Dual-wall copper-lined vacuum insulation — keeps drinks at temperature through the workday
- 500D Tarpaulin cooler bag — rugged shell with a leak-resistant, heat-sealed liner
- Powder-coat finish on stainless steel — resists chips and scratches in daily use
- Two 16 oz tumblers included — a ready-made set for shared lunches or gifting
- Leak-resistant cooler construction — 10mm foam and heat-sealed liner contain spills
Description
The Urban Peak® Keystone Lunch Date Kit bundles two 16 oz Keystone Trail Vacuum Tumblers inside the Reserve 12 Can Cooler. The tumblers are built from stainless steel with dual-wall copper-lined vacuum insulation and a powder-coat finish, while the cooler bag uses 500D Tarpaulin with a matte 55C PVC exterior, 38c PVC lining, and 10mm foam for structure.
The cooler's leak-resistant, heat-sealed liner helps contain condensation and spills, making the kit a practical carry for lunches, picnics, or outdoor breaks. Because the tumblers are hand wash only, the kit stays easy to maintain with a simple rinse after use.
Specifications
| Brand | Urban Peak |
|---|---|
| Material | Stainless steel tumblers; 500D Tarpaulin, matte 55C PVC, 38c PVC lining, 10mm foam cooler |
| Capacity | Two 16 oz tumblers; 12-can cooler |
| Dimensions | 10" W x 7" D x 12" H |
| Weight | 2.9 lb |
| Care | Hand wash only |
| Origin | Imported, decorated in USA |
Decoration & Imprint
5 methods
Your mark is applied to the top of the cooler pouch. Heat Transfer — Full Color lays down a smooth, photographic layer; Laser etches a permanent, recessed mark in the material's own tone; and Screen Print pushes crisp, opaque ink onto the surface. Choose Heat Transfer — Full Color for gradient-rich or photographic artwork, Laser for single-tone logos and fine line work, or Screen Print for bold spot-color designs.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Heat Transfer — Full ColorFull-color imprint · 1 location included · no setup charge
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 6 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 6–11 pieces $69.63 each, 12–35 pieces $67.23 each, 36–71 pieces $64.99 each, 72–5,000 pieces $61.90 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Laser (one-time setup $60.00); Screen Print (1 color/location included · one-time setup $60.00 · Up to 4 colors); Heat Transfer — Full Color (one-time setup $60.00 · Full color); Heat Transfer — Full Color (Full-color imprint · 1 location included · no setup charge).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002415IN STOCK
SKU: SAE0002415
Urban Peak® Keystone Lunch Date Kit
Starting At$61.90each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!