Key Facts
- 120-lumen flashlight and COB — dual light sources for focused or wide-area illumination
- Built-in 400mAh rechargeable battery — USB-C cable included, no battery replacement needed
- Telescoping zoom design — adjusts from close-up tasks to wide-area lighting
- Aluminum body — durable construction for everyday carry and emergency use
- Supports Shelter to Soldier™ — a portion of proceeds aids veteran service dog training
Description
Compact and Ready
The iCOOL Woodland Mini is a compact tactical flashlight built for everyday reliability. Its aluminum body and spring clip make it easy to carry, while the included protective case keeps it stored safely when not in use. The telescoping design lets you switch from a focused spot to a wide flood, adapting to the task at hand.
Power and Convenience
With a 120-lumen flashlight and a 120-lumen COB side light, this light delivers bright output for close-up work or broader illumination. The built-in 400mAh rechargeable battery charges via the included USB-C cable, so you can skip disposable batteries. A portion of proceeds supports Shelter to Soldier™, a nonprofit that trains rescued dogs as service animals for veterans.
Branding and Giving Back
Your logo can be laser etched into the aluminum body for a permanent, recessed mark. This flashlight also makes a meaningful gift, as each purchase contributes to a veteran-support cause.
Specifications
| Brand | ICool |
|---|---|
| Material | Aluminum |
| Dimensions | 4.5" W x 2" D x 1.62" H |
| Weight | 0.24 lb |
| Battery | Built-in 400mAh rechargeable lithium battery |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your logo is laser etched into the aluminum body, creating a permanent, recessed mark in the material's own tone. For full-color or photographic artwork, a heat transfer domed decal can be applied to the flashlight's surface, offering a glossy, three-dimensional finish.
Laserone-time setup $62.50
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Heat Transfer — Domed Decalone-time setup $62.50 · Full color
Domed Decal (also doming or 3D resin label): a full-color printed adhesive label finished with a clear polyurethane resin that cures into a raised dome over the artwork. The result is a lens-like gloss surface with real physical depth — saturated color sealed against scratches, moisture, and UV fading. Color renders as a full-color process blend that comes close to brand-color references but does not match exact spot inks.
Production & Delivery
6 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 6 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 50 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 50–99 pieces $11.25 each, 100–249 pieces $10.86 each, 250–499 pieces $10.50 each, 500–5,000 pieces $10.00 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $62.50 per order.
- How long does production take?
- Production takes 6 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (one-time setup $62.50); Heat Transfer — Domed Decal (one-time setup $62.50 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: LGK0004325IN STOCK
SKU: LGK0004325
iCOOL Woodland Mini Rechargeable Tactical Flashlight
Starting AtWas $10.45 Now $10.00each
Ideal for client gifts, home-improvement promotions, employee safety programs, and homeowners.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!