Key Facts
- ANSI 107 Type R Class 3 — certified high-visibility safety wear
- Breathable polyester mesh — keeps wearers cool during active work
- Five-pocket layout — chest, radio, tablet, and two lower pockets
- 2-inch silver reflective tape — enhances visibility in low light
- Reinforced mic tabs — stitched for secure radio attachment
Description
Safety and Visibility
This Class 3 vest meets ANSI 107 Type R Class 3 standards, with 2-inch silver reflective tape and a breathable polyester mesh body. The high-visibility yellow color and reflective trim ensure the wearer stands out in low-light conditions, supporting workplace safety programs.
Practical Design
Five pockets — including an internal tablet pocket, chest pocket, radio pocket, and two external lower pockets — keep tools and devices within reach. The zipper closure and reinforced mic tabs add durability for daily use on the job.
Customization
Your logo can be applied via heat transfer in full color or reflective finish. The back imprint area measures 7 by 7 inches, providing a clear canvas for branding on this safety vest.
Specifications
| Brand | Starline |
|---|---|
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your logo is applied to the back of the vest via heat transfer. Choose full-color heat transfer for photographic detail or reflective heat transfer for a high-visibility mark. Both methods are available for this product.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Heat Transfer — ReflectiveFull-color imprint · 1 location included · one-time setup $60.00
Reflective transfer cuts your design from a light-reflective vinyl and bonds it to the fabric under heat and pressure. In normal light the mark reads as a solid graphic in the vinyl's own tone; under headlights or a camera flash it lights up, reflecting light back toward its source. The applied layer is smooth, flexible, and applied as a single reflective layer.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 18 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 18–35 pieces $29.99 each, 36–71 pieces $28.96 each, 72–143 pieces $27.99 each, 144–5,000 pieces $26.66 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Heat Transfer — Reflective (Full-color imprint · 1 location included · one-time setup $60.00).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What is PMS color matching?
- Pantone Matching System (PMS) color matching means the printer mixes ink to your exact Pantone number instead of substituting the nearest stock color, so the merchandise in the field matches the logo in your brand guide. It is the difference between branded merchandise that looks like your brand and merch that almost does. More about PMS color matching →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001975IN STOCK
SKU: SAE0001975
Starline Class 3 Five Pocket Black Bottom Front Value Vest
Starting At$26.66each, imprint included — one-time setup charged separately
Ideal for staff, uniforms, health care teams, and safety programs.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!