Key Facts
- Gunmetal Guilloche-etched barrel — a contemporary engraved pattern wraps the barrel
- High gloss enamel finish — silver accents frame the cap and barrel
- Pull cap rollerball — the cap pulls off to expose the writing tip
- Brass body — a metal barrel that carries the pen's weight
- Individually cellophaned — each pen arrives wrapped on its own
Description
The Guillox® 9-Rollerball Pen is a jumbo executive writing instrument built on a brass body. High gloss enamel covers the barrel, silver accents trim the cap, and the gunmetal barrel carries a contemporary Guilloche engraved pattern that gives the surface a repeating etched texture.
It writes as a pull cap rollerball, so the cap lifts away to reveal the tip and seats back over it between uses. The pen ships individually cellophaned, which keeps each one wrapped on its own before it reaches a desk, a mailer, or a handout.
Your artwork is laser engraved into the cap. The beam etches into the metal itself, leaving a permanent, recessed mark in the material's own tone rather than an added ink layer, so fine line work and small text hold crisp edges.
Specifications
| Material | Brass |
|---|---|
| Mechanism | Pull Cap |
| Tip | Rollerball |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your mark is laser engraved into the cap of the pen, where the beam etches into the metal surface for a permanent, recessed imprint in the material's own tone.
Laser — Personalizationno setup charge
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 25–49 pieces $18.31 each, 50–99 pieces $17.70 each, 100–249 pieces $17.12 each, 250–499 pieces $16.33 each, 500–5,000 pieces $15.61 each. Prices are per unit.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser — Personalization (no setup charge); Laser (no setup charge); Laser (no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HBN0010240IN STOCK
SKU: HBN0010240
Guillox® 9-Rollerball Pen, Jumbo Executive Metal Pen
Starting At$15.61each
A fit for giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!