Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.

Full Color Label — a separately printed label heat-applied to the finished item, using full-spectrum process printing (CMYK) to reproduce detailed logos, gradients, and photographic images. Holds fine detail and small text with sharp clarity. The result reads as a smooth printed film on the surface, with a defined perimeter edge and slight relief where the label meets the product. Color reproduces faithfully across the full image.

Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.

Digital printing sends artwork straight from file to the item — no plates or per-color screens — laying all colors down in a single pass. It carries photographs, gradients, drop shadows, and dense multi-color artwork at high resolution, reading as a flat image on the surface. A specific brand color is rendered as a close full-color process simulation rather than an exact spot ink, and on colored items the substrate shifts the appearance.

Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.

Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.