What is the minimum order quantity?

The minimum order is 4 pieces with Laser — Deep Etch.

How much does it cost per unit?

Pricing falls with quantity: 4–19 pieces $63.11 each, 20–74 pieces $59.38 each, 75–174 pieces $57.90 each, 175–5,000 pieces $57.40 each. Prices are per unit.

How long does production take?

Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.

What decoration methods are available?

Laser — Deep Etch (no setup charge); Digital Full Color — Jet-Directt (one-time setup $55.00 · Full color).

Key Facts

One glass pitcher — the set's serving piece anchors the group
Four pint glasses — each pours a full serving for the table
Laser deep etch — the mark is carved into the glass surface
Made in the United States — domestic origin for the set
Material — Glass
Origin — United States

Description

This set pairs one glass pitcher with four pint glasses, giving a table a single serving vessel and enough glasses to go around. The pieces are made of clear glass and share the same material, so the group reads as one coordinated set rather than mismatched drinkware.

Customization is handled by laser deep etch, which carves the design into the glass itself. The result is a recessed mark with bold contrast and a texture you can feel under your fingertips, and because the mark carries no pigment, it will not rely on added color to stay legible.

Specifications

Origin	Made in USA

Decoration & Imprint

2 methods

Your artwork is laser deep etched into the glass, carving the design below the surface for a recessed mark with no added pigment. For artwork that relies on added color, direct-to-garment Jet-Directt is available on the glasses only.

Laser — Deep Etchno setup charge

Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.

Locations & sizes

Side 1 2.5 Inches W × 2.5 Inches H

Minimum order

4 pieces

Digital Full Color — Jet-Directtone-time setup $55.00 · Full color

Jet-Directt is Moderne Glass’s digital full-color decoration for drinkware and awards. Depending on the selected product, it is available on the lid, sidewall or bottom. The supported imprint area and options depend on the individual item.

Locations & sizes

Bottom 1.875 Inches W × 1.875 Inches H

Max colors

Full color

Minimum order

4 pieces

Charges

Setup$55.00 one-time

Production & Delivery

approx. 5 business days production

Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
Production: approximately 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.

Arrival dates are shown at checkout.

Questions & Answers

Ask about sizing, imprinting or turnaround

What is the minimum order quantity?: The minimum order is 4 pieces with Laser — Deep Etch.
How much does it cost per unit?: Pricing falls with quantity: 4–19 pieces $63.11 each, 20–74 pieces $59.38 each, 75–174 pieces $57.90 each, 175–5,000 pieces $57.40 each. Prices are per unit.
Is there a setup charge?: No setup charge.
How long does production take?: Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
What decoration methods are available?: Laser — Deep Etch (no setup charge); Digital Full Color — Jet-Directt (one-time setup $55.00 · Full color).

From our decoration and product guides

What does laser engraving look like on a promotional product?: Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Can laser engraving be done in my brand color?: No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
What is direct-to-garment printing?: Direct-to-garment (DTG) printing jets water-based CMYK ink straight onto a pre-treated garment, with a white underbase on dark fabric, then heat-cures it into the fibers. It reproduces photographs, gradients and dense multi-color artwork with fine detail and a soft hand, because the ink soaks into the cloth rather than sitting on top. It prints most vividly on cotton and light fabrics. More about Full Color →

Customer Reviews

No product reviews yet

No product reviews yet for this item.

SKU: MDS0000285IN STOCK

SKU: MDS0000285

Deep Etched Glass Pitcher and Pint Glass Set

Name: Deep Etched Glass Pitcher and Pint Glass Set
SKU: MDS0000285
Price: 57.40 USD
Availability: InStock

Starting At$57.40each

A fit for employee gifts, client gifts, and company events.

A glass pitcher paired with four pint glasses, offered as a coordinated set. Your artwork is laser deep etched into the glass as a permanent, recessed mark with no added color.

Chat with or Call Our Friendly Wisconsin Staff

Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!