Key Facts
- Solid cherry wood stand — holds all four coasters upright between uses
- Bonded leather face — urethane coated to resist staining
- Cork backing — protects furniture surfaces from moisture and scratches
- Molded zinc or brass-plated zinc — medallion finish in silver or brass tone
- Made in China — imported construction
Description
This four-coaster set stands in a solid cherry wood base that keeps the pieces upright and within reach on a desk, bar, or side table. Each coaster pairs a bonded leather face with a molded zinc or brass-plated zinc medallion, so the set reads as a finished accessory rather than a loose stack.
The leather is urethane coated to resist staining, and the cork backing protects furniture surfaces from moisture and scratches. Because the stand holds all four coasters together, the set stays organized and presentable through daily use.
Specifications
| Brand | JAFFA |
|---|---|
| Material | Cherry; Coaster: Brass-Plated Zinc or Zinc Finish, Leather, Cork |
| Dimensions | 3.625 in. W x 3.625 in. D x 4 in. H |
| Care | Wipe clean |
| Origin | Imported, decorated in USA |
Decoration & Imprint
6 methods
Your mark is screen printed onto the leather face of each coaster, where opaque ink sits on top of the surface for crisp, solid-color artwork. Screen Print suits bold spot-color logos, solid shapes, and simple lettering with clean edges.
Screen PrintPMS1 color/location included · no setup charge · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Custom Crafted MedallionPMS1 color/location included · no setup charge · Up to 1 color
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Full ColorPMSno setup charge · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Debossno setup charge
Debossing presses your design into the material with a heated die, displacing the surface to leave a recessed impression below the surrounding plane. No ink, no added color. The mark is the substrate itself — a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker; bold logos and simple type carry well, while intricate detail rounds and loses definition.
Foil StampPMSno setup charge · 1 color
Foil stamping (hot stamping) presses a thin metallic foil onto the surface with a heated metal die, bonding it where the die makes contact and leaving a shallow pressed-in impression. The mark reads as a single reflective metallic tone: it throws light at some angles and darkens to an outline of itself at others, giving the logo depth against the base. Solid shapes and bold lettering hold cleanly; very fine lines and small text can soften as the foil seats under pressure.
Production & Delivery
30 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 30 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 10 pieces with Custom Crafted Medallion.
- How much does it cost per unit?
- Pricing falls with quantity: 10–14 pieces $124.09 each, 15–74 pieces $119.81 each, 75–199 pieces $115.82 each, 200–5,000 pieces $110.30 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 30 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Screen Print (1 color/location included · no setup charge · Up to 1 color); Custom Crafted Medallion (1 color/location included · no setup charge · Up to 1 color); Laser (1 location included · no setup charge); Full Color (no setup charge · Full color); Deboss (no setup charge); Foil Stamp (no setup charge · 1 color).
From our decoration and product guides
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
- Which artwork works best for screen printing?
- Bold spot-color shapes, blocks of solid color and simple lettering, where you want strong, opaque coverage that reads clearly. Screen printing holds clean edges on solid shapes and standard lettering, but very fine hairlines, smooth gradients and photographic blends lose definition because each color prints as a flat solid layer. For gradient or photographic artwork choose a full-color process method instead. More about Screen Print →
- Can a screen print match my exact Pantone color?
- Yes. Because every color is a separate, premixed spot ink, screen printing can be mixed to a specific Pantone (PMS) number. Where a product offers it, Pantone matching is an option for an additional charge per color; without it the printer uses the closest standard stock ink color. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0002420IN STOCK
SKU: BCC0002420
JAFFA® Four Coasters with Solid Cherry Stand
Starting At$110.30each, imprint included
A fitting choice for client gifts, employee gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!