Key Facts
- Up to 120 lumens — headlight output with approximately 3.5 hours of run time.
- No-touch sensor control — the left sensor button handles on/off; the right button selects high, low and flashing light levels.
- Rechargeable — a USB charging cable is included.
- 420 stainless steel knife — with several grip points, a pocket clip and a lanyard hole.
Description
This Starline gift set pairs a Wave Sensor LED rechargeable headlight with a camo knife. The headlight offers an output up to 120 lumens, approximately 3.5 hours of run time, an adjustable light angle and an elastic head strap. A left-button sensor allows no-touch on/off operation, while the right button selects high, low and flashing light levels. A USB charging cable and a 1000D water repellent bag are included.
The knife is made of 420 stainless steel and features several grip points, a pocket clip and a lanyard hole.
Specifications
| Brand | Starline |
|---|---|
| Material | 420 stainless steel (knife); 1000D water repellent (bag) |
| Dimensions | 4.5 in W x 9.75 in H |
| Weight | 0.38 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Laser, Digital Print and Pad Print are available for this gift set. Laser placement includes the knife blade and handle.
Laser1 location included · one-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Digital PrintFull-color imprint · 1 location included · one-time setup $60.00
Digital printing reproduces artwork from a digital file on the product's supported print medium. This may be the item itself or a separate label; the product source determines the medium and attachment. Achievable detail, finish and color matching depend on the product and supplier.
Pad Print1 color/location included · no setup charge · Up to 2 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 12–24 pieces $32.13 each, 25–49 pieces $31.02 each, 50–99 pieces $29.99 each, 100–5,000 pieces $28.56 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (1 location included · one-time setup $60.00); Digital Print (Full-color imprint · 1 location included · one-time setup $60.00); Pad Print (1 color/location included · no setup charge · Up to 2 colors).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is digital full-color printing?
- Digital printing sends the artwork straight from file to the item with no plates or per-color screens, laying every color down in a single pass. It carries photographs, gradients, drop shadows and dense multi-color artwork at high resolution, reading as a flat image on the surface, and holds fine detail and small type cleanly. More about Full Color →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002366IN STOCK
SKU: SAE0002366
Wave Sensor LED Rechargeable Headlight and Camo Knife Gift Set
Starting At$28.56each, imprint included
A practical option for client gifts, employee safety programs and home-improvement promotions.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!