Key Facts
- Built-in bottle opener — opens bottles at the bucket, no separate tool needed
- Powder coated steel — a colored finish over the steel body
- Side carry handle — moves a full bucket from bar to table
- Five-quart capacity — holds ice for a round of drinks
Description
This ice bucket holds five quarts of ice in a powder coated steel body, with a built-in bottle opener mounted on the side and a handle for carrying. It is built for bar and restaurant service, where ice and bottled drinks are handled in the same motion.
The powder coated finish gives the steel a colored surface, and the galvanized option leaves the steel unpainted. The bottle opener sits on the bucket itself, so opening a bottle does not require setting the bucket down or reaching for a separate tool.
Specifications
| Origin | Imported, decorated in USA |
|---|
Decoration & Imprint
4 methods
Your artwork is heat-applied to the bucket's exterior surface. Heat Transfer — Four Color / 4CP lays photographic, multi-color artwork as a smooth, thin bonded film, and Direct to Film presses full-color artwork as a durable, flexible bonded layer; both hold fine detail and gradients, so route photographic or many-color artwork to either method and reserve exact spot-color solids for a method that builds color from discrete layers.
Heat Transfer — Four Color / 4CPone-time setup $65.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Direct to FilmFull-color imprint · 1 location included · one-time setup $65.00
Direct-to-film printing lays CMYK ink and a white underbase onto a PET film, then heat-presses the image onto the garment as a flexible bonded layer, with no fabric pre-treatment. It reproduces photographs, gradients, and many-color artwork; the white base carries color on dark cloth. Color lands close to brand references as a process blend, with a smooth, slightly filmic hand.
Direct to FilmFull-color imprint · 1 location included · one-time setup $65.00
Direct-to-film printing lays CMYK ink and a white underbase onto a PET film, then heat-presses the image onto the garment as a flexible bonded layer, with no fabric pre-treatment. It reproduces photographs, gradients, and many-color artwork; the white base carries color on dark cloth. Color lands close to brand references as a process blend, with a smooth, slightly filmic hand.
Direct to Filmno setup charge · Full color
Direct-to-film printing lays CMYK ink and a white underbase onto a PET film, then heat-presses the image onto the garment as a flexible bonded layer, with no fabric pre-treatment. It reproduces photographs, gradients, and many-color artwork; the white base carries color on dark cloth. Color lands close to brand references as a process blend, with a smooth, slightly filmic hand.
Production & Delivery
15 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 15 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Direct to Film.
- How much does it cost per unit?
- Pricing falls with quantity: 25–99 pieces $18.52 each, 100–249 pieces $17.97 each, 250–599 pieces $17.45 each, 600–1,199 pieces $16.74 each, 1,200–5,000 pieces $16.09 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 15 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Four Color / 4CP (one-time setup $65.00 · Full color); Direct to Film (Full-color imprint · 1 location included · one-time setup $65.00); Direct to Film (Full-color imprint · 1 location included · one-time setup $65.00); Direct to Film (no setup charge · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- Are custom drinkware items dishwasher safe?
- It depends on the material and the decoration. The product page lists care instructions in Specifications whenever the manufacturer states them. Where dishwasher safety is not stated, hand-wash: it protects the imprint and, on insulated tumblers and bottles, the vacuum seal. Decorated stainless steel and any item with a metallic or foil imprint should be hand-washed unless the listing says otherwise. More about Drinkware →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: PEA0000373IN STOCK
SKU: PEA0000373
Five Quart Ice Bucket with Built-In Bottle Opener
Starting At$16.09each, imprint included — one-time setup charged separately
A practical fit for bars and restaurants, and for company events, client gifts, and employee gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!