Key Facts
- Hand-blown and hand-cut — minor bubbles and swirls are inherent to full-lead crystal
- 24% full-lead crystal — ranges from colorless to a subtle blue tint
- Crowned with an optic crystal globe — a global motif for milestone recognition
- Dimensions and weight vary piece to piece — each award is individually formed
Description
The Empire Award pairs a hand-blown, hand-cut full-lead crystal body with an optic crystal globe on top. Because the crystal is formed and cut by hand, minor bubbles and swirls are inherent to the material, and the tone ranges from colorless to a subtle blue tint.
Dimensions and weight vary from piece to piece, so no two awards are exactly alike. That variation is a mark of the hand-forming process rather than a defect, and it gives each recipient a piece that stands on its own.
Your artwork is laser deep etched into the crystal, carving a recessed mark with bold contrast and a texture you can feel. The mark carries no pigment, so it reads in the material's own tone and holds up as a permanent imprint.
Specifications
| Material | Full Lead Crystal |
|---|---|
| Dimensions | 11" x 4.25"; 12" x 4.5"; 13" x 4.75" |
| Weight | 5 lbs; 6 lbs; 7 lbs |
Decoration & Imprint
3 methods
Your mark is laser deep etched into the crystal body of the award, carving a recessed imprint with bold contrast and a texture you can feel under your fingertips. The mark carries no added color, so it shows in the material's own tone.
Laser — Deep Etchno setup charge
Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.
Etching (Sandcarved)no setup charge
Sand carving masks your artwork onto the glass and blasts the exposed areas with abrasive, cutting a noticeably deep, frosted mark into the surface. The depth gives the piece a hand-finished, premium feel that surface etching cannot match. The base mark carries no added color.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
7 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 7 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 1 piece with Laser — Deep Etch.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 7 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser — Deep Etch (no setup charge); Etching (Sandcarved) (no setup charge); Laser (no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: JCS0000317IN STOCK
SKU: JCS0000317
Empire 24% Lead Crystal World Globe Award
Starting At$226.45each
A fitting award for employee recognition, service milestones, and retirement presentations.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!