Speak to a Pro(844) 667 7666Live Chat
Promotion Pros
  • Cut Corner Cube Optical Crystal Paperweight
  • Cut Corner Cube Optical Crystal Paperweight — view 2

Key Facts

  • Optical crystal body — clear material carries a dimensional image inside
  • Rests on a flat edge — the cube appears to balance on one corner
  • Laser — 3D Subsurface engraving — layered points form a floating image, outer surfaces left smooth
  • Made in the U.S.A. — domestic origin for the finished piece

Description

The Cut Corner Cube is a paperweight cut from clear optical crystal into a cube that rests on a flat edge, so it reads as though it is standing on one of its corners. The clear body keeps the focus on the artwork suspended inside it.

Laser — 3D Subsurface engraving builds the image from precisely placed points inside the crystal, leaving the outer surfaces smooth and unmarked. The result is a dimensional mark that holds fine internal detail and subtle depth gradations.

Specifications

MaterialOptical Crystal
Dimensions2" x 2" x 2"; 2 3/8" x 2 3/8" x 2 3/8"; 3 1/8" x 3 1/8" x 3 1/8"; 4" x 4" x 4"
Weight1 lbs; 1.5 lbs; 3.5 lbs; 6.25 lbs
OriginMade in USA

Decoration & Imprint

3 methods

Your artwork is laser engraved as a 3D subsurface image inside the crystal, with the outer surfaces left smooth and unmarked. Laser — Deep Etch carves a recessed mark into the surface for bold, tactile contrast, while Heat Transfer — Illumachrome prints a full-color image directly into the crystal for photographic depth. Choose 3D Subsurface for layered, depth-bearing artwork, Deep Etch for bold logos and lettering that read without color, and Illumachrome for photographic or multi-color designs.

Laser — Deep Etchno setup charge

Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.

Imprint area
1-1/2" x 1-1/2" x 1-1/2" subsurface; 2" x 2" x 2" subsurface; 2-5/8" x 2-5/8" x 2-5/8" subsurface
Minimum order
5 pieces
Laser — 3D Subsurface1 location included · no setup charge

3D laser engraving focuses laser pulses to precise depths inside a clear, hard substrate, creating tiny internal fracture points that together build a layered, dimensional image beneath the surface. The design appears to float within the material while the outer faces stay smooth and unmarked. It reads as a frosted, light-catching form with genuine front-to-back depth, holds fine internal detail, and, because the marks are enclosed within the substrate, resists surface wear.

Imprint area
1-1/2" x 1-1/2" x 1-1/2" subsurface; 2" x 2" x 2" subsurface; 2-5/8" x 2-5/8" x 2-5/8" subsurface
Minimum order
5 pieces
Included
✓ Imprint in one location — no setup charge
Heat Transfer — IllumachromeFull-color imprint · 1 location included · no setup charge

Illumachrome prints a full-color image directly into the crystal, fusing artwork to the surface so it becomes part of the piece rather than a coating on top. The result reads with photographic depth: fine detail, smooth gradients, and continuous tonal shading show through the clear material with no raised edge or texture to the touch. Photos, complex illustrations, and shaded logos reproduce faithfully, with brand colors simulated close to true rather than matched exactly.

Imprint area
1-1/2" x 1-1/2" x 1-1/2" subsurface; 2" x 2" x 2" subsurface; 2-5/8" x 2-5/8" x 2-5/8" subsurface
Max colors
Full color
Minimum order
5 pieces
Included
✓ Full-color imprint in one location — no setup charge

Production & Delivery

8 business days production
  • Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
  • Production: 8 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
  • FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
  • 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.

Arrival dates are shown at checkout.

Questions & Answers

Ask about sizing, imprinting or turnaround
What is the minimum order quantity?
The minimum order is 5 pieces with Laser — Deep Etch.
Is there a setup charge?
No setup charge.
How long does production take?
Production takes 8 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
What decoration methods are available?
Laser — Deep Etch (no setup charge); Laser — 3D Subsurface (1 location included · no setup charge); Heat Transfer — Illumachrome (Full-color imprint · 1 location included · no setup charge).

From our decoration and product guides

What does laser engraving look like on a promotional product?
Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Can laser engraving be done in my brand color?
No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
What is a heat transfer imprint?
Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →

Customer Reviews

No product reviews yet

No product reviews yet for this item.

SKU: CYD0000293IN STOCK

SKU: CYD0000293

Cut Corner Cube Optical Crystal Paperweight

Starting At$19.90each

  • USA Made

A fitting piece for employee recognition, service milestones, and retirement gifts.

A clear optical crystal paperweight shaped as a cube that rests on a flat edge, giving the illusion of standing on one corner. Your artwork is laser engraved as a 3D subsurface image suspended inside the crystal.

Chat with or Call Our Friendly Wisconsin Staff

Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!

Chat with a live person