Key Facts
- 100% polyester mesh — body fabric, with 100% polyester tricot exterior pockets.
- 2-inch reflective tape — provides 360-degree visibility on the body and sleeves.
- Molded center front zipper — this garment must be fully zipped to be in compliance with ANSI 107 standards.
Description
This CornerStone vest is made of 100% polyester mesh with 100% polyester tricot exterior pockets. Reflective 2-inch tape provides 360-degree visibility on the body and sleeves, with two-tone contrast polyester tricot fabric under the reflective tape and contrast binding. Storage includes a left chest bellows pocket with a flap and hook and loop closure, two layered right chest pockets (one open, one divided), two lower front flap pockets with hook and loop closures, and interior open lower mesh pockets on both sides. A mic clip sits at the left chest, and the vest closes with a molded center front zipper.
Built for surveyors or anyone who needs the highest ANSI visibility, the vest uses short sleeves to meet ANSI 107 Class 3 requirements. This garment must be fully zipped to be in compliance with ANSI 107 standards.
Specifications
| Brand | CornerStone |
|---|---|
| GTIN | 00191265846721 |
Decoration & Imprint
1 method
Heat Transfer — Reflective decoration is available for this vest.
Heat Transfer — Reflective1 color/location included · one-time setup $30.00 · 1 color
Reflective transfer cuts your design from a light-reflective vinyl and bonds it to the fabric under heat and pressure. In normal light the mark reads as a solid graphic in the vinyl's own tone; under headlights or a camera flash it lights up, reflecting light back toward its source. The applied layer is smooth, flexible, and applied as a single reflective layer.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 18 pieces with Heat Transfer — Reflective.
- Is there a setup charge?
- Yes — a one-time setup charge of $30.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Heat Transfer — Reflective (1 color/location included · one-time setup $30.00 · 1 color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- How should I wash decorated apparel to protect the logo?
- Turn the garment inside out, wash cold with like colors, skip bleach and fabric softener, and tumble dry low or hang to dry. Never iron directly over a screen print, heat transfer or embroidery; iron inside out or around the decoration. Embroidery and cured screen-print ink withstand repeated washing when the garment's own care label is followed. More about Apparel →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SNR0004751IN STOCK
SKU: SNR0004751
CornerStone ANSI 107 Class 3 Surveyor Mesh Zippered Two-Tone Short Sleeve Vest
Starting At$37.57each, imprint included — one-time setup charged separately
Well suited to uniforms and safety programs for staff who need high-visibility workwear.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!