Key Facts
- Optical crystal construction — clear material with a bright, polished look
- Display in two ways — stand tall on the short end or lay flat on the long end
- Assorted sizes — three dimensions to fit different award needs
- Material — Optical Crystal
- Dimensions — 3" x 2 1/4" x 2 3/8"; 3 3/8" x 2 5/8" x 2 3/4"; 3 3/4" x 3" x 3 1/4"
Description
Crystal Craft
The Collier Trapezoid Cube is shaped from optical crystal, a clear material chosen for its bright, polished appearance. Its trapezoid form gives it a distinctive silhouette that stands out on a desk or shelf, and it can be displayed in two ways: standing tall on its short end or laid flat on its long end.
Branding Options
Your artwork can be engraved into the crystal as a dimensional 3D image using Laser — 3D Subsurface engraving, which forms the image inside the material while leaving the outer surfaces smooth. Alternatively, Heat Transfer — Illumachrome delivers a full-color image printed directly into the crystal for photographic depth.
Award Versatility
Available in three sizes, this cube suits a range of recognition moments, from employee recognition to service milestones. Its clear crystal construction and flexible display options make it a versatile choice for corporate awards.
Decoration & Imprint
2 methods
Your artwork is imprinted on the crystal face of the trapezoid cube. For dimensional depth, Laser — 3D Subsurface engraving forms a layered image inside the material, while Heat Transfer — Illumachrome prints a full-color image directly into the crystal. Choose Laser — 3D Subsurface for layered, depth-bearing artwork, or Heat Transfer — Illumachrome for photographic images and gradients.
Laser — 3D Subsurface1 location included · no setup charge
3D laser engraving focuses laser pulses to precise depths inside a clear, hard substrate, creating tiny internal fracture points that together build a layered, dimensional image beneath the surface. The design appears to float within the material while the outer faces stay smooth and unmarked. It reads as a frosted, light-catching form with genuine front-to-back depth, holds fine internal detail, and, because the marks are enclosed within the substrate, resists surface wear.
Heat Transfer — IllumachromeFull-color imprint · 1 location included · no setup charge
Illumachrome prints a full-color image directly into the crystal, fusing artwork to the surface so it becomes part of the piece rather than a coating on top. The result reads with photographic depth: fine detail, smooth gradients, and continuous tonal shading show through the clear material with no raised edge or texture to the touch. Photos, complex illustrations, and shaded logos reproduce faithfully, with brand colors simulated close to true rather than matched exactly.
Production & Delivery
8 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 8 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- Rush production in 5 business days is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 5 pieces with Laser — 3D Subsurface.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 8 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. Rush production in 5 business days is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser — 3D Subsurface (1 location included · no setup charge); Heat Transfer — Illumachrome (Full-color imprint · 1 location included · no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: CYD0000128IN STOCK
SKU: CYD0000128
Collier Trapezoid Cube Crystal Award
Starting At$40.50each, imprint included
A fitting choice for employee recognition, service milestones, and retirement awards.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!