Key Facts
- Optical crystal construction — clear material with beveled edges for a refined look
- Three sizes available — from 2 inches to 4 inches square
- 3D image capability — laser subsurface engraving creates a dimensional image inside the crystal
- Material — Optical Crystal
- Dimensions — 2" x 2" x 2" to 4" x 4" x 4"
Description
Crystal Craft
The Colin Cube is a paperweight made from optical crystal, cut into a square cube with beveled edges. Its clear, polished surface catches light and adds a touch of refinement to any desk. Available in three sizes, it fits a range of display preferences.
Branding Options
Your logo can be rendered in several ways: a deep laser etch that leaves a tactile recessed mark, a 3D subsurface engraving that forms an image inside the crystal, or a full-color Illumachrome print that reproduces photographic detail. Each method offers a distinct look, letting you match the branding to your message.
Recognition Value
As a paperweight, it serves a practical purpose while showcasing your brand. Its crystal material and customizable surface make it suitable for employee recognition and service milestone awards, where a lasting impression matters.
Decoration & Imprint
3 methods
Your logo is imprinted on the top face of the cube. Decoration options include Laser — Deep Etch, which carves a recessed mark into the surface; Laser — 3D Subsurface, which forms a dimensional image inside the crystal; and Heat Transfer — Illumachrome, which prints a full-color image directly into the material. For bold logos and lettering, deep etch provides a tactile, lasting mark; for photographic or multi-color artwork, Illumachrome delivers fine tonal reproduction; for a dimensional effect, 3D subsurface is the choice.
Laser — Deep Etch1 location included · no setup charge
Deep etching carves your design well into the surface, removing material to leave a recessed, permanent mark. Running deeper than a standard laser pass, the result is strongly dimensional and contoured. The finished mark is the material itself — bare carved tone with crisp shadowed contrast where the cut catches light against the untouched surface. You get a mark you can both see and feel, reading as permanent and material rather than printed on.
Laser — 3D Subsurface1 location included · no setup charge
3D laser engraving focuses laser pulses to precise depths inside a clear, hard substrate, creating tiny internal fracture points that together build a layered, dimensional image beneath the surface. The design appears to float within the material while the outer faces stay smooth and unmarked. It reads as a frosted, light-catching form with genuine front-to-back depth, holds fine internal detail, and, because the marks are enclosed within the substrate, resists surface wear.
Heat Transfer — IllumachromeFull-color imprint · 1 location included · no setup charge
Illumachrome prints a full-color image directly into the crystal, fusing artwork to the surface so it becomes part of the piece rather than a coating on top. The result reads with photographic depth: fine detail, smooth gradients, and continuous tonal shading show through the clear material with no raised edge or texture to the touch. Photos, complex illustrations, and shaded logos reproduce faithfully, with brand colors simulated close to true rather than matched exactly.
Production & Delivery
8 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 8 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- Rush production in 5 business days is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 5 pieces with Laser — Deep Etch.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 8 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. Rush production in 5 business days is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser — Deep Etch (1 location included · no setup charge); Laser — 3D Subsurface (1 location included · no setup charge); Heat Transfer — Illumachrome (Full-color imprint · 1 location included · no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: CYD0000771IN STOCK
SKU: CYD0000771
Colin Cube Optical Crystal Paperweight
Starting At$19.90each, imprint included
Ideal for employee recognition, service milestones, and retirement gifts.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!