Key Facts
- Recycled materials — made from post consumer recycled materials; the lining, zipper and strap are not rPET.
- Water- and stain-repellent fabric
- Zippered main compartment — with a notebook compartment, a pen compartment and an elastic back pocket for a passport, cards and other accessories.
- Care — spot clean and air dry.
Description
Materials
Made from post consumer recycled materials, the pouch's recycled polyester (rPET) is obtained by melting down existing plastic bottles and other material sources to create new polyester fiber. The lining, zipper and strap are not rPET. The fabric is water and stain repellent.
Storage
The pouch has a zippered main compartment, a notebook compartment, a pen compartment and an elastic back pocket for carrying a passport, cards and other accessories, along with a carrying cord.
Care
Spot clean and air dry.
Specifications
| Brand | BrandCharger |
|---|---|
| Material | Recycled polyester (rPET), stainless steel and leatherette; lining, zipper and strap are not rPET |
| Dimensions | 7.25 in W x 10 in H x 0.5 in D |
| Weight | 0.6 lb |
| Pockets | Zippered main compartment; notebook compartment; pen compartment; elastic back pocket for a passport, cards and other accessories |
| Care | Spot clean, air dry |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Deboss and Laser decoration are available.
Deboss1 location included · one-time setup $50.00
Debossing presses your design into the material with a heated die, displacing the surface to leave a recessed impression below the surrounding plane. No ink, no added color. The mark is the substrate itself — a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker; bold logos and simple type carry well, while intricate detail rounds and loses definition.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Deboss.
- How much does it cost per unit?
- 25–5,000 pieces $14.67 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $50.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Deboss (1 location included · one-time setup $50.00); Laser (one-time setup $100.00).
From our decoration and product guides
- What does a debossed logo look like?
- Debossing presses the design into the material with a heated die, leaving a recessed impression below the surrounding surface. There is no ink and no added color: the mark is the material itself, a tonal, shadowed shape that catches light along its pressed edges and gives tactile depth under a fingertip. On grained leatherette the recess burnishes slightly darker. More about Debossed →
- Can a deboss include color or fine detail?
- No. Because nothing is added, debossing reproduces shape but not color, and the displaced material rounds the edges of fine lines, small text and gradients. Reserve it for bold, simple logos and type where a subtle, tactile impression carries the branding. For a printed ink color choose pad print or screen print; for crisp, permanent fine detail on a hard surface choose laser engraving. More about Debossed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0013096IN STOCK
SKU: HTP0013096
BrandCharger Rover Eco Tech & Travel Pouch
Starting At$14.67each, imprint included — one-time setup charged separately
A practical pouch for travel, trade shows and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!