Key Facts
- ANSI-Z87.1 approved — meets the recognized eye-protection standard
- Scratch-resistant polycarbonate lens — 99.9% UVA and UVB protection
- Rubberized temple ends and nosepiece — reduce slippage and add comfort
- Includes microfiber storage pouch and neck cord — keeps the glasses protected and close at hand
- Lightweight low-profile design — 0.08 lb per pair
Description
The Bouton® Anser Gray Glasses are low-profile safety glasses built around bayonet-style wrap-around polycarbonate lenses. Hinged arms fold for storage, and rubberized temple ends and a soft rubber nosepiece reduce slippage during wear. The scratch-resistant lens provides 99.9% UVA and UVB protection, and the glasses are ANSI-Z87.1 approved.
Each pair includes a microfiber storage pouch and a neck cord, so the glasses stay protected between uses and within reach on the job. The pouch doubles as a branding surface, giving your mark a second place to appear alongside the lenses.
Specifications
| Brand | Bouton |
|---|---|
| Material | Polycarbonate |
| Dimensions | 6" w x 2.75" d x 2" h |
| Weight | 0.08 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your imprint can be placed on the lenses of the glasses or on the top of the microfiber pouch. Heat Transfer — Full Color reproduces photographic, gradient-rich artwork with smooth tonal blends, while Pad Print keeps fine lines and small text crisp on curved surfaces.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Pad Print1 color/location included · one-time setup $60.00 · Up to 2 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 36 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 36–71 pieces $17.13 each, 72–143 pieces $16.54 each, 144–249 pieces $15.99 each, 250–5,000 pieces $15.23 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (one-time setup $60.00 · Full color); Pad Print (1 color/location included · one-time setup $60.00 · Up to 2 colors).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0000987IN STOCK
SKU: SAE0000987
Bouton® Anser Gray Safety Glasses with Wrap-Around Lenses
Starting At$15.23each, imprint included — one-time setup charged separately
Ideal for safety training, wellness programs, employee care kits, and health fairs.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!