Key Facts
- Plunger-action with stylus tip — flip between paper and touchscreen without swapping tools
- Soft-touch rubberized finish — a grippy, matte barrel that resists the slick feel of bare metal
- Laser-etched grip design — echoed on the plunger for a consistent look along the barrel
- Tungsten carbide ball tip — a hard, wear-resistant ball seated in the writing point
- 1mm medium ballpoint, black ink — a standard line width for everyday note-taking
Description
The Good Value™ Bella Stylus Pen is a plunger-action writing instrument built on an aluminum barrel with ABS plastic and iron components. A soft-touch rubberized finish covers the body, and chrome accents frame a laser-etched design in the grip that repeats on the plunger. The stylus tip at the top lets the same tool move between paper and a touchscreen.
Writing comes from a 1mm medium ballpoint with black ink and a tungsten carbide ball, a hard material chosen for the point where the pen meets paper. The soft-touch finish keeps the barrel comfortable to hold through repeated use, and the etched grip design stays visible as the pen is handled.
The barrel measures 0.375 in. wide by 5.6875 in. tall and is assembled in China. Customization runs through Full Color, Laser, or Screen Print, so artwork can be matched to the mark the design calls for.
Specifications
| Brand | Good Value |
|---|---|
| Material | Aluminum, ABS Plastic, Iron |
| Length | 5.6875 in. |
| Mechanism | Plunger-Action, Stylus |
| Tip | Tungsten Carbide ball |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your imprint lands on the barrel of the pen. Full Color suits photographic or gradient artwork, Laser etches a permanent single-tone mark into the surface, and Screen Print lays down crisp opaque spot color — route the artwork to the method that matches its detail and color needs.
Full ColorPMSno setup charge · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Laserno setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — Personalizationno setup charge
Screen PrintPMS1 color/location included · no setup charge · Up to 1 color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 150 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 150–299 pieces $1.64 each, 300–499 pieces $1.58 each, 500–999 pieces $1.53 each, 1,000–2,499 pieces $1.46 each, 2,500–5,000 pieces $1.39 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Full Color (no setup charge · Full color); Laser (no setup charge); Laser — Personalization (no setup charge); Screen Print (1 color/location included · no setup charge · Up to 1 color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/244287.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0004734IN STOCK
SKU: BCC0004734
Good Value™ Bella Stylus Pen, Soft-Touch Aluminum Ballpoint
Starting At$1.39each, imprint included
A practical pick for giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!