Key Facts
- Metal barrel construction — matte metallic finish over a solid metal body
- Chrome tip, rings, plunger and clip — coordinated trim across the pen
- Black rubber stylus tip — works on touchscreen devices alongside paper
- Black ink refill — standard ballpoint writing in black
- Laser mark shows frosted white — the engraving reads light against every barrel color
Description
The Assant is a metal ballpoint pen built with a matte metallic barrel and chrome accents at the tip, rings, plunger and clip. A black rubber stylus sits at the opposite end, so the same tool works on paper and on a touchscreen.
It writes in black ink from a standard refill, and the metal body gives the pen a solid feel in hand. Laser engraving marks the surface itself, showing as frosted white against the barrel.
Specifications
| Brand | Cedar Crest |
|---|---|
| Material | Metal |
| Mechanism | Plunger |
| Tip | Chrome with black rubber stylus |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your artwork is laser engraved on the barrel of the pen, where the mark reads as frosted white against the matte metallic finish. Laser — 360 Wrap carries the same engraving around the full circumference for artwork meant to be seen from every angle. Choose standard Laser for a single-panel logo or fine line work, and Laser — 360 Wrap when the design should wrap the barrel.
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — 360 Wrapno setup charge
A 360 wrap engraving rotates the product under the laser so artwork, patterns, or repeating designs run continuously around the body. Like all laser engraving, the mark is colorless — the finish beneath is revealed in a precise, permanent etch that will not wear or wash away. It suits designs made to be seen from every angle.
Production & Delivery
4 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 4 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 24-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 100 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 100–249 pieces $1.84 each, 250–499 pieces $1.78 each, 500–749 pieces $1.72 each, 750–999 pieces $1.64 each, 1,000–5,000 pieces $1.56 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 4 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 24-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Laser (1 location included · no setup charge); Laser — 360 Wrap (no setup charge).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/7087.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: CDT0000013IN STOCK
SKU: CDT0000013
Assant Metal Stylus Pen with Chrome Trim
Starting At$1.56each, imprint included
A practical choice for giveaways, front-desk handouts, and mailers.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!