Key Facts
- Double-wall vacuum insulation — the walled construction separates contents from the outer surface
- Two lids, two formats — a screw-on leak-proof sports lid and a screw-on spill-resistant flip-top lid
- Silicone carry holder — a built-in loop keeps the bottle in hand on the move
- Sweat resistant — the exterior stays dry when cold drinks are inside
- 22 oz. capacity — measured when filled to the rim
Description
The Good Value™ Active 2-in-1 Vacuum Bottle Tumbler is a 22 oz. stainless steel vessel built to switch roles. Double-wall vacuum insulation separates the contents from the outer wall, and the two included lids let the same body serve as a sports bottle or an open tumbler. A silicone holder adds a carry point, and the exterior is sweat resistant when cold drinks are inside.
Both formats accept your artwork. Full Color reproduces photographic and gradient designs, Laser etches a permanent recessed mark in the material's own tone, and Digital Print — Personalization changes names, numbers, or images from piece to piece within a single run.
Specifications
| Brand | Good Value |
|---|---|
| Material | Stainless Steel |
| Capacity | 22 oz. |
| Dimensions | 11.25 in. height |
| Origin | Imported, decorated in USA |
Decoration & Imprint
5 methods
Your artwork is applied to the body of the bottle. Full Color handles photographic and gradient designs, Laser etches a permanent recessed mark in the material's own tone, and Digital Print — Personalization varies names, numbers, or images per piece. Route full-color or photographic artwork to Full Color or Digital Print — Personalization, single-tone line work to Laser, and per-recipient variation to Digital Print — Personalization.
Spot ColorPMS1 color/location included · one-time setup $55.00 · Up to 1 color
Full ColorPMSone-time setup $55.00 · Full color
The supplier lists this decoration only as full color, so the one thing it establishes is coloration: the artwork carries as many colors as it needs — photographs, gradients, blends, and dense multi-color detail — rather than a counted set of solid inks, and there is no color count to choose. How the color reaches the item (direct print, transfer, decal, or sublimation) is the supplier's choice for this product and is not stated in their data, so surface feel, finish, and durability follow that process rather than this label.
Laserone-time setup $110.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — Personalizationone-time setup $55.00
Digital Print — PersonalizationPMSone-time setup $55.00 · Full color
Personalization uses variable-data digital printing (VDP) — names, numbers, text, barcodes, photos, or graphics change per piece within the same run while the surrounding layout stays fixed. The result is a smooth, flat full-color print with no raised texture, reproducing photos, gradients, and fine type cleanly. Brand hues render as a close full-color process simulation rather than an exact spot match.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 72-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Spot Color.
- How much does it cost per unit?
- 24–5,000 pieces $23.89 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 72-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- What decoration methods are available?
- Spot Color (1 color/location included · one-time setup $55.00 · Up to 1 color); Full Color (one-time setup $55.00 · Full color); Laser (one-time setup $110.00); Laser — Personalization (one-time setup $55.00); Digital Print — Personalization (one-time setup $55.00 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What is digital full-color printing?
- Digital printing sends the artwork straight from file to the item with no plates or per-color screens, laying every color down in a single pass. It carries photographs, gradients, drop shadows and dense multi-color artwork at high resolution, reading as a flat image on the surface, and holds fine detail and small type cleanly. More about Full Color →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: BCC0003523IN STOCK
SKU: BCC0003523
Good Value™ Active 2-in-1 Vacuum Bottle Tumbler, 22 oz.
Starting At$23.89each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!