Key Facts
- Heavy Olefin cover with UV treatment — resists fading and sun damage during extended outdoor use
- Wind vent canopy — reduces wind stress and helps the umbrella stay stable
- No-pinch easy-open mechanism — telescopic pole extends smoothly without catching fingers
- Lightweight aluminum frame — 11 lb total weight for easier transport and setup
- Six-panel design — classic market umbrella silhouette with broad 82" open diameter
Description
Built for outdoor events and marketplaces, this seven-foot umbrella combines a heavy Olefin cover with UV treatment and a wind vent to handle sun and breeze. The six-panel canopy opens to an 82-inch diameter, providing ample shade while the lightweight aluminum frame and telescopic pole make setup simple.
Specifications
| Material | Olefin cover, aluminum frame |
|---|---|
| Dimensions | 84" W x 92" H x 53" D (closed) |
| Weight | 11 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
12 methods
Your artwork is heat-applied to the canopy panels. Heat Transfer delivers crisp spot-color solids with a smooth, low-profile bond, while Heat Transfer — Four Color / 4CP reproduces photographic, gradient-rich artwork with fine detail. Choose the method that matches your artwork: spot colors for flat, even coverage or four-color process for tonal blends and photographic images.
Heat TransferFull-color imprint · 1 location included · one-time setup $65.00
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transferone-time setup $65.00 · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transferone-time setup $65.00 · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transfer — Four Color / 4CPone-time setup $65.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Heat Transferno setup charge · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transferno setup charge · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transferno setup charge · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transfer — Four Color / 4CPno setup charge · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Heat Transferone-time setup $65.00 · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transferone-time setup $65.00 · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transferone-time setup $65.00 · Full color
Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.
Heat Transfer — Four Color / 4CPone-time setup $65.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Production & Delivery
20 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 20 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 6 pieces with Heat Transfer.
- How much does it cost per unit?
- Pricing falls with quantity: 6–23 pieces $119.57 each, 24–71 pieces $115.45 each, 72–143 pieces $111.60 each, 144–299 pieces $106.29 each, 300–5,000 pieces $101.45 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 20 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer (Full-color imprint · 1 location included · one-time setup $65.00); Heat Transfer (one-time setup $65.00 · Full color); Heat Transfer (one-time setup $65.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $65.00 · Full color); Heat Transfer (no setup charge · Full color); Heat Transfer (no setup charge · Full color); Heat Transfer (no setup charge · Full color); Heat Transfer — Four Color / 4CP (no setup charge · Full color); Heat Transfer (one-time setup $65.00 · Full color); Heat Transfer (one-time setup $65.00 · Full color); Heat Transfer (one-time setup $65.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $65.00 · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: PEA0000021IN STOCK
SKU: PEA0000021
7' Telescopic Aluminum Market Umbrella
Starting At$101.45each, imprint included — one-time setup charged separately
Ideal for outdoor events, summer promotions, and team events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!