Key Facts
- FSC-certified wood frame — two-piece solid wood shaft and wooden ribs from well-managed forests
- UV-coated polyester canopy — six panels shade the area beneath the 7-foot span
- Vented canopy top — an opening at the peak lets rising warm air escape
- Manual open mechanics — wood shaft and six-panel construction open by hand
- 11 lb packed weight — ships in a box for storage between seasons
Description
This 7-foot market umbrella pairs a two-piece solid wood frame and wooden ribs with a UV-coated polyester canopy. The wood is FSC-certified, sourced from well-managed forests, and the umbrella is manufactured under FSC License FSC-C010988. Six canopy panels span the 7-foot arc, and a vent at the top lets rising warm air pass through.
The frame opens by hand on a wood shaft, and the umbrella packs down to a 44 1/2-inch closed length at 11 lb in a box. That makes it straightforward to store between seasons and to move between a patio, a café seating area, or an event setup.
Specifications
| Material | Polyester canopy; FSC-certified wood frame and ribs |
|---|---|
| Dimensions | 84 in. arc; 82 in. open diameter; 44.5 in. closed length; 86 in. extended height |
| Weight | 11 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
12 methods
Your artwork is heat-bonded to the polyester canopy as a smooth, thin applied layer. Spot-color heat transfer prints each color of your artwork as its own premixed solid ink, while four-color process heat transfer builds photographic and gradient-rich artwork from blended process inks.
Heat Transfer — Spot Colorone-time setup $65.00 · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Spot Colorone-time setup $65.00 · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Spot Colorone-time setup $65.00 · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Four Color / 4CPone-time setup $65.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Heat Transfer — Spot Colorno setup charge · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Spot Colorno setup charge · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Spot Colorno setup charge · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Four Color / 4CPno setup charge · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Heat Transfer — Spot ColorFull-color imprint · 1 location included · one-time setup $65.00
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Spot Colorone-time setup $65.00 · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Spot Colorone-time setup $65.00 · Full color
Spot-color heat transfer prints each color of your design as its own premixed solid ink onto a film, then bonds it to the fabric under heat and pressure. Because every color goes down as one solid ink rather than a blend, edges stay crisp and fills stay even across the mark. The applied result is a smooth, thin bonded layer that flexes with the garment.
Heat Transfer — Four Color / 4CPone-time setup $65.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Production & Delivery
20 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 20 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 6 pieces with Heat Transfer — Spot Color.
- How much does it cost per unit?
- Pricing falls with quantity: 6–23 pieces $115.98 each, 24–71 pieces $111.98 each, 72–143 pieces $108.25 each, 144–299 pieces $103.10 each, 300–5,000 pieces $98.41 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 20 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Spot Color (one-time setup $65.00 · Full color); Heat Transfer — Spot Color (one-time setup $65.00 · Full color); Heat Transfer — Spot Color (one-time setup $65.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $65.00 · Full color); Heat Transfer — Spot Color (no setup charge · Full color); Heat Transfer — Spot Color (no setup charge · Full color); Heat Transfer — Spot Color (no setup charge · Full color); Heat Transfer — Four Color / 4CP (no setup charge · Full color); Heat Transfer — Spot Color (Full-color imprint · 1 location included · one-time setup $65.00); Heat Transfer — Spot Color (one-time setup $65.00 · Full color); Heat Transfer — Spot Color (one-time setup $65.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $65.00 · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- Where are your products made?
- The Origin row in each product's Specifications states where the item is manufactured: it reads Made in a named country for US, Canadian, UK, Swiss and European origins, and Imported, decorated in USA when the blank comes from elsewhere and is decorated domestically. Products manufactured in the United States are also collected in the USA Made category. More about USA-made products →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: PEA0000401IN STOCK
SKU: PEA0000401
7' FSC Wooden Market Umbrella with UV-Treated Polyester Canopy
Starting At$98.41each, imprint included — one-time setup charged separately
A fit for outdoor events, summer promotions, team events, and golf outings.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!