Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.

Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.

Foil stamping (hot stamping) presses a thin metallic foil onto the surface with a heated metal die, bonding it where the die makes contact and leaving a shallow pressed-in impression. The mark reads as a single reflective metallic tone: it throws light at some angles and darkens to an outline of itself at others, giving the logo depth against the base. Solid shapes and bold lettering hold cleanly; very fine lines and small text can soften as the foil seats under pressure.

Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.