Key Facts
- 5,000 mAh lithium ion battery — 15W output recharges most devices
- Bamboo and rPET fabric body — recycled polyester comes from melted-down plastic bottles
- Fabric is rPET — remaining components are not made of recycled material
- FSC® certified — forest-based materials audited by an independent third party
- Indicator lights — show charge status at a glance
- Type-C input with cord included — recharges in approximately 3 hours
Description
This 5,000 mAh power bank pairs a lithium ion battery with a body wrapped in bamboo and rPET fabric. The recycled polyester is obtained by melting down existing plastic bottles and other material sources to create new polyester fiber; the fabric is rPET, while the remaining components are not made of recycled material. A 15W output charges most devices, and indicator lights show status at a glance.
Charging runs through a Type-C input with the cord included, and a full charge takes approximately 3 hours. Your phone's own charging cord is required to charge your device. The bamboo content supports responsible forestry, and the product carries FSC® certification — forest-based materials sourced from forests audited by an independent third party to confirm they are managed according to FSC®'s social and environmental standards.
Specifications
| Material | Bamboo & rPET Fabric |
|---|---|
| Dimensions | 2.5" W x 3.75" H x 0.75" D |
| Weight | 0.34 lb |
| Battery | 5,000 mAh lithium ion; 15W output |
| Compatibility | Charges most devices; requires your phone's charging cord |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your mark is pad printed onto the power bank's surface, where a thin, flat layer of opaque spot-color ink conforms to the contour and sits nearly flush with crisp edges.
Pad PrintPMS1 color/location included · one-time setup $40.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 25 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 25–49 pieces $19.28 each, 50–99 pieces $18.61 each, 100–249 pieces $17.99 each, 250–499 pieces $17.13 each, 500–5,000 pieces $16.35 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $40.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Pad Print (1 color/location included · one-time setup $40.00 · Up to 1 color).
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What is PMS color matching?
- Pantone Matching System (PMS) color matching means the printer mixes ink to your exact Pantone number instead of substituting the nearest stock color, so the merchandise in the field matches the logo in your brand guide. It is the difference between branded merchandise that looks like your brand and merch that almost does. More about PMS color matching →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0014077IN STOCK
SKU: HTP0014077
5000 mAh Bamboo & Recycled Fabric Power Bank
Starting At$16.35each, imprint included — one-time setup charged separately
A practical giveaway for trade shows, onboarding kits, and conference swag.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!