Key Facts
- Recycled stainless steel, inside and out — recycled content in both the outer shell and the liner
- Vacuum-insulated double wall — keeps drinks cold up to 24 hours and hot up to 8 hours
- Screw-on flip top lid — spill-resistant closure with an easy carry handle
- Meets FDA requirements — BPA free construction
- Hand wash recommended — simple care keeps the powder-coated finish presentable
Description
This 40 oz. tumbler is made from recycled stainless steel for both the outer shell and the inner liner, finished with a powder coat that gives the body a matte, grippable surface. The double wall is vacuum insulated, so the tumbler holds cold drinks up to 24 hours and hot drinks up to 8 hours.
A screw-on flip top lid keeps the drink contained between sips, and the easy carry handle makes the tumbler simple to move from desk to car to job site. The body meets FDA requirements and is BPA free, and hand washing is recommended to keep the finish looking its best.
Your logo is laser etched directly into the tumbler's surface, producing a permanent, recessed mark in the material's own tone rather than an added color. The mark holds fine lines and small text crisply, which suits single-tone logos and compact lettering.
Specifications
| Material | Recycled stainless steel |
|---|---|
| Dimensions | 10 in. height |
| Weight | 1.15 lb |
| Care | Hand wash recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
1 method
Your artwork is laser etched into the tumbler's surface, where the beam cuts a permanent, recessed mark in the material's own tone with no added ink.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 40 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 40–119 pieces $30.56 each, 120–239 pieces $29.64 each, 240–359 pieces $28.79 each, 360–479 pieces $27.61 each, 480–5,000 pieces $26.54 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $100.00 per order.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (one-time setup $100.00).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Are custom drinkware items dishwasher safe?
- It depends on the material and the decoration. The product page lists care instructions in Specifications whenever the manufacturer states them. Where dishwasher safety is not stated, hand-wash: it protects the imprint and, on insulated tumblers and bottles, the vacuum seal. Decorated stainless steel and any item with a metallic or foil imprint should be hand-washed unless the listing says otherwise. More about Drinkware →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0014542IN STOCK
SKU: HTP0014542
40 Oz. Intrepid Recycled Stainless Steel Tumbler with Handle
Starting At$26.54each
A practical pick for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!