Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.

Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.

Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.

Heat transfer prints your design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result reads as a smooth, thin bonded layer — low-profile and flexible enough to move with the fabric, not ink soaked into the cloth.

Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.