Key Facts
- Double wall vacuum insulation — keeps drinks hot over 8 hours, cold over 18
- Copper lining — an added layer inside the vacuum wall
- 18/8 stainless steel walls — inner and outer walls in the same alloy
- Sweat-resistant body — condensation stays off hands and desks
- Ships assembled — lid, gasket and straw arrive in place
- FDA listed — supplier-stated certification for the drinking vessel
Description
The Vancouver mug holds 30 oz. and builds its walls from 18/8 stainless steel, inside and out, with a copper lining between them. Double wall vacuum insulation keeps drinks hot for more than 8 hours or cold for more than 18, and the sweat-resistant body keeps condensation off hands and desks.
A black plastic straw, a spill-resistant slide lid with rubber gasket and an ABS screw-on lid arrive assembled, so the mug is ready to fill out of the box. Hand washing is recommended to keep the finish and lid parts in shape.
Screen printing lays crisp, opaque color artwork on the surface, while laser etching cuts a permanent, recessed mark in the material's own tone. Both hold up on a mug that moves between desk, car and job site.
Specifications
| Brand | Evans |
|---|---|
| Material | 18/8 stainless steel inner and outer walls; copper lining; ABS screw-on lid; rubber gasket and straw |
| Capacity | 30 oz |
| Weight | 1.12 lbs |
| Care | Hand washing recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your artwork is placed on the mug body. Screen printing pushes ink through a mesh stencil for crisp, opaque color that sits on top of the surface, while laser etching cuts a permanent, recessed mark in the material's own tone. Choose screen printing for bold spot-color artwork and simple lettering, or laser for single-tone logos and fine line work.
Screen PrintFull-color imprint · 1 location included · one-time setup $55.00
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laserone-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 60 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 60–119 pieces $19.09 each, 120–239 pieces $18.44 each, 240–479 pieces $17.84 each, 480–959 pieces $17.01 each, 960–5,000 pieces $16.25 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Screen Print (Full-color imprint · 1 location included · one-time setup $55.00); Laser (one-time setup $55.00).
From our decoration and product guides
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
- Which artwork works best for screen printing?
- Bold spot-color shapes, blocks of solid color and simple lettering, where you want strong, opaque coverage that reads clearly. Screen printing holds clean edges on solid shapes and standard lettering, but very fine hairlines, smooth gradients and photographic blends lose definition because each color prints as a flat solid layer. For gradient or photographic artwork choose a full-color process method instead. More about Screen Print →
- Can a screen print match my exact Pantone color?
- Yes. Because every color is a separate, premixed spot ink, screen printing can be mixed to a specific Pantone (PMS) number. Where a product offers it, Pantone matching is an option for an additional charge per color; without it the printer uses the closest standard stock ink color. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: EAN0000881IN STOCK
SKU: EAN0000881
30 oz. Vancouver Stainless Steel Insulated Mug with Straw
Starting At$16.25each, imprint included — one-time setup charged separately
A practical pick for employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!