Key Facts
- Double wall vacuum insulation — keeps drinks hot for 8+ hours and cold for 18+ hours
- Powder-coated 18/8 stainless steel — sweat-resistant exterior with a durable, matte finish
- Copper-lined interior — enhances temperature retention for all-day performance
- Spill-resistant slide lid — rubber gasket seals the opening to prevent leaks
- BPA-free and FDA compliant — safe for daily beverage use
Description
The Evans 28 oz. Powder Coated Stainless Steel Travel Tumbler combines rugged construction with advanced insulation. Its double wall vacuum design, reinforced by a copper lining, locks in temperatures—keeping coffee hot for over 8 hours or iced drinks cold for more than 18. The powder-coated 18/8 stainless steel body resists sweat and condensation, so it stays comfortable to hold and won’t leave rings on surfaces.
A spill-resistant slide lid with a rubber gasket helps prevent leaks during commutes or travel. The tumbler is BPA-free and FDA compliant, meeting safety standards for everyday use. Hand washing is recommended to preserve the finish and insulation performance.
Specifications
| Brand | Evans |
|---|---|
| Material | 18/8 Stainless Steel, Rubber Gasket, ABS Sliding Lid, Copper Lining |
| Capacity | 28 oz |
| Dimensions | 8 1/4" H x 3 1/4" D |
| Weight | 0.88 lbs |
| Care | Hand wash recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your artwork is placed on the tumbler body. Screen print delivers bold, opaque spot colors; laser engraves a permanent, recessed mark in the material's own tone; and digital print reproduces full-color photographic imagery and gradients in one pass.
Screen Printone-time setup $55.00 · Full color
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laserone-time setup $55.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Digital Printone-time setup $95.00 · Full color
Digital printing sends artwork straight from file to the item — no plates or per-color screens — laying all colors down in a single pass. It carries photographs, gradients, drop shadows, and dense multi-color artwork at high resolution, reading as a flat image on the surface. A specific brand color is rendered as a close full-color process simulation rather than an exact spot ink, and on colored items the substrate shifts the appearance.
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 48 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 48–95 pieces $16.14 each, 96–143 pieces $15.62 each, 144–287 pieces $15.14 each, 288–575 pieces $14.47 each, 576–5,000 pieces $13.87 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $55.00 per order.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Screen Print (one-time setup $55.00 · Full color); Laser (one-time setup $55.00); Digital Print (one-time setup $95.00 · Full color).
From our decoration and product guides
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
- Which artwork works best for screen printing?
- Bold spot-color shapes, blocks of solid color and simple lettering, where you want strong, opaque coverage that reads clearly. Screen printing holds clean edges on solid shapes and standard lettering, but very fine hairlines, smooth gradients and photographic blends lose definition because each color prints as a flat solid layer. For gradient or photographic artwork choose a full-color process method instead. More about Screen Print →
- Can a screen print match my exact Pantone color?
- Yes. Because every color is a separate, premixed spot ink, screen printing can be mixed to a specific Pantone (PMS) number. Where a product offers it, Pantone matching is an option for an additional charge per color; without it the printer uses the closest standard stock ink color. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: EAN0000880IN STOCK
SKU: EAN0000880
Evans 28 oz. Powder Coated Stainless Steel Travel Tumbler
Starting At$13.87each
Ideal for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!