Key Facts
- 18/8 stainless steel — single-wall construction keeps it lightweight
- Matte finish — modern, minimal look for daily use
- Threaded lid — provides a secure seal for cold beverages
- 25 oz capacity — sized for office, gym, or on-the-go hydration
Description
Materials and Construction
The h2go Tread is built from single-wall 18/8 stainless steel, a food-grade material that resists rust and corrosion. Its lightweight design makes it easy to carry throughout the day, while the matte finish offers a clean, understated appearance that suits any setting.
Everyday Hydration
With a 25 oz capacity, this bottle is sized for daily hydration at the office, gym, or while traveling. The threaded lid creates a secure seal, helping to prevent spills during transport. It is intended for cold beverages, making it a practical choice for water, iced tea, or other chilled drinks.
Customization
Your logo can be applied using laser etching, which carves a permanent, recessed mark directly into the stainless steel surface. This method produces a clean, single-tone imprint that withstands regular use and washing.
Specifications
| Brand | h2go |
|---|---|
| Material | Stainless Steel |
| Capacity | 25 oz |
| Dimensions | 2.875 in W x 9.5 in H |
| Weight | 0.52 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
9 methods
Your logo is laser etched into the front face of the bottle, creating a permanent, recessed mark in the stainless steel's own tone. This method is ideal for single-tone logos and fine line work, and it holds crisp edges on small text and detailed artwork.
laserX+one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
h4 · Heat Transfer 4CPone-time setup $100.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
laserXone-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
screenprint1 color/location included · one-time setup $65.00 · Up to 24 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
foilone-time setup $100.00 · Full color
Foil stamping (hot stamping) presses a thin metallic foil onto the surface with a heated metal die, bonding it where the die makes contact and leaving a shallow pressed-in impression. The mark reads as a single reflective metallic tone: it throws light at some angles and darkens to an outline of itself at others, giving the logo depth against the base. Solid shapes and bold lettering hold cleanly; very fine lines and small text can soften as the foil seats under pressure.
d4 · Digital Four Color Processone-time setup $65.00 · Full color
D4 prints CMYK artwork directly onto the item and finishes it with a clear protective coat, giving the full-color image a subtle raised, tactile dimension. It reproduces photographs, gradients, and multi-color artwork with fine detail. Spot colors are not available on this process — color is a full-color blend that comes close to brand references rather than matching exact spot inks.
laserX360one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
d4/360one-time setup $65.00 · Full color
The 360 wrap prints full-color artwork around the entire circumference of the item in one continuous pass. Photographs, gradients, patterns, and multi-color designs carry seamlessly around the body, reading as a flat, high-resolution image. Color is a full-color process blend that comes close to brand references rather than matching exact spot inks.
h4 MAXone-time setup $100.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Ground shipping.
Arrival dates are shown at checkout.
Quick answers
Minimums, pricing, setup, turnaround and decoration
- What is the minimum order quantity?
- The minimum order is 48 pieces with screenprint.
- How much does it cost per unit?
- Pricing falls with quantity: 48–71 pieces $11.78 each, 72–143 pieces $11.37 each, 144–5,000 pieces $10.99 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- laserX+ (one-time setup $65.00); h4 · Heat Transfer 4CP (one-time setup $100.00 · Full color); laserX (one-time setup $65.00); screenprint (1 color/location included · one-time setup $65.00 · Up to 24 colors); foil (one-time setup $100.00 · Full color); d4 · Digital Four Color Process (one-time setup $65.00 · Full color); laserX360 (one-time setup $65.00); d4/360 (one-time setup $65.00 · Full color); h4 MAX (one-time setup $100.00 · Full color).
Questions & Answers
Ask about sizing, imprinting or turnaround
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: ETS0001795IN STOCK
SKU: ETS0001795
h2go Tread 25 oz Stainless Steel Bottle
Starting At$10.99each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!