Key Facts
- Recycled aluminum body — single-wall construction keeps it lightweight
- Screw-on, spill-resistant lid — wide mouth opening for easy filling
- Easy-carry silicone strap — attached for portability
- BPA-free — meets FDA requirements for food contact
- Hand wash recommended — preserves the finish and imprint
Description
Materials and construction
The Blaire bottle is built from recycled aluminum with a single-wall design, keeping it light at 0.39 lb. The wide mouth opening makes filling and cleaning straightforward, while the screw-on lid resists spills during everyday carry.
Safety and care
This bottle is BPA-free and meets FDA requirements for food contact, so it suits daily hydration. Hand washing is recommended to keep both the bottle and any imprint looking its best.
Customization
Your logo can be applied through pad printing, screen printing, or laser etching. Each method offers a distinct look, from flat ink to a permanent etched mark.
Specifications
| Material | Recycled Aluminum; Silicone strap |
|---|---|
| Capacity | 25 oz. |
| Dimensions | 9 in. H |
| Weight | 0.39 lb |
| Care | Hand wash recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your logo is placed on the front face of the bottle. Pad Print, Screen Print, and Laser are all available. For fine lines and small text, choose Pad Print or Laser; for bold solid shapes, Screen Print is the better route.
Pad PrintPMS1 color/location included · one-time setup $40.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Screen PrintPMS1 color/location included · one-time setup $40.00 · Up to 2 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
CB DRINKWARE SMALLPMSone-time setup $95.00 · Up to 4 colors
Production & Delivery
5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 5 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 36 pieces with Pad Print.
- How much does it cost per unit?
- Pricing falls with quantity: 36–71 pieces $7.88 each, 72–143 pieces $7.60 each, 144–287 pieces $7.35 each, 288–575 pieces $7.00 each, 576–5,000 pieces $6.68 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $40.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (1 color/location included · one-time setup $40.00 · Up to 1 color); Screen Print (1 color/location included · one-time setup $40.00 · Up to 2 colors); Laser (one-time setup $100.00); CB DRINKWARE SMALL (one-time setup $95.00 · Up to 4 colors).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/261757.
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0014703IN STOCK
SKU: HTP0014703
Blaire Recycled Aluminum Bottle, 25 oz.
Starting At$6.68each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!