Key Facts
- Capacity — 24 oz
- Material — single wall stainless steel
- Lid — threaded lid for a secure seal
- Use — intended for cold beverages
Description
The h2go Solus is a 24 oz bottle made from single wall stainless steel with a threaded lid for a secure seal. Its streamlined design is built for cold beverage hydration on the go.
The bottle has a matte finish and is intended for cold beverages.
Specifications
| Brand | h2go |
|---|---|
| Material | Stainless Steel |
| Capacity | 24 oz |
| Dimensions | 2.75 in width x 10.625 in height |
| Weight | 0.44 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
8 methods
Laser — laserX, Screen Print, Digital Print — d4, Heat Transfer — Four Color / 4CP, Laser — 360 Wrap and Digital Print — 360 Wrap are available for this bottle.
Laser — laserX (branded)one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $65.00 · Up to 24 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Laser — laserX (branded)1 location included · one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Digital Print — d4 (Digital Four Color Process)one-time setup $65.00 · Full color
D4 prints CMYK artwork directly onto the item and finishes it with a clear protective coat, giving the full-color image a subtle raised, tactile dimension. It reproduces photographs, gradients, and multi-color artwork with fine detail. Spot colors are not available on this process — color is a full-color blend that comes close to brand references rather than matching exact spot inks.
Heat Transfer — Four Color / 4CPone-time setup $100.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Laser — 360 Wrapone-time setup $65.00
A 360 wrap engraving rotates the product under the laser so artwork, patterns, or repeating designs run continuously around the body. Like all laser engraving, the mark is colorless — the finish beneath is revealed in a precise, permanent etch that will not wear or wash away. It suits designs made to be seen from every angle.
Digital Print — 360 Wrapone-time setup $65.00 · Full color
The 360 wrap prints full-color artwork around the entire circumference of the item in one continuous pass. Photographs, gradients, patterns, and multi-color designs carry seamlessly around the body, reading as a flat, high-resolution image. Color is a full-color process blend that comes close to brand references rather than matching exact spot inks.
Heat Transfer — Four Color / 4CPone-time setup $100.00 · Full color
Four-color-process heat transfer prints your design in CMYK onto a release film, then bonds it to the garment under heat and pressure. It reproduces photographs, gradients, and many-color artwork with continuous-tone fidelity that solid spot inks cannot match. The finished mark reads as a smooth, low-profile layer at the surface; color is built from blended process inks, landing close to brand references rather than as exact spot solids.
Production & Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 48 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 48–71 pieces $10.17 each, 72–143 pieces $9.82 each, 144–5,000 pieces $9.49 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser — laserX (branded) (one-time setup $65.00); Screen Print (1 color/location included · one-time setup $65.00 · Up to 24 colors); Laser — laserX (branded) (1 location included · one-time setup $65.00); Digital Print — d4 (Digital Four Color Process) (one-time setup $65.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $100.00 · Full color); Laser — 360 Wrap (one-time setup $65.00); Digital Print — 360 Wrap (one-time setup $65.00 · Full color); Heat Transfer — Four Color / 4CP (one-time setup $100.00 · Full color).
- Can I get a sample first?
- Yes — request a free sample at https://www.promotionpros.com/samplerequest/247430.
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: ETS0001952IN STOCK
SKU: ETS0001952
h2go Solus 24 oz Bottle
Starting At$9.49each, imprint included — one-time setup charged separately
Suited to employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!