Key Facts
- Capacity — 20 oz
- Double-wall vacuum insulation — 18/8 stainless steel construction
- True Taste ceramic inner coating
- Threaded lid with included reusable Eastman Tritan™ straw
- Powder coated exterior
Description
The Fellow Carter Cold Tumbler is a 20 oz tumbler made from double-wall 18/8 stainless steel with vacuum insulation. Its True Taste ceramic inner coating is designed to keep flavors pure, and the threaded lid pairs with the included reusable Eastman Tritan™ straw. The exterior has a powder coated finish.
Specifications
| Brand | Fellow |
|---|---|
| Material | 18/8 stainless steel |
| Capacity | 20 oz |
| Dimensions | 3 in W x 11.6 in H |
| Weight | 1.17 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
6 methods
Decoration is available in Digital Print — d4, Laser — laserX, Screen Print, Digital Print — 360 Wrap and Laser — 360 Wrap.
Digital Print — d4 (Digital Four Color Process)one-time setup $65.00 · Full color
D4 prints CMYK artwork directly onto the item and finishes it with a clear protective coat, giving the full-color image a subtle raised, tactile dimension. It reproduces photographs, gradients, and multi-color artwork with fine detail. Spot colors are not available on this process — color is a full-color blend that comes close to brand references rather than matching exact spot inks.
Laser — laserX (branded)1 location included · one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Laser — laserX (branded)one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $65.00 · Up to 24 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Digital Print — 360 Wrapone-time setup $65.00 · Full color
The 360 wrap prints full-color artwork around the entire circumference of the item in one continuous pass. Photographs, gradients, patterns, and multi-color designs carry seamlessly around the body, reading as a flat, high-resolution image. Color is a full-color process blend that comes close to brand references rather than matching exact spot inks.
Laser — 360 Wrapone-time setup $65.00
A 360 wrap engraving rotates the product under the laser so artwork, patterns, or repeating designs run continuously around the body. Like all laser engraving, the mark is colorless — the finish beneath is revealed in a precise, permanent etch that will not wear or wash away. It suits designs made to be seen from every angle.
Production & Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Screen Print.
- How much does it cost per unit?
- Pricing falls with quantity: 24–71 pieces $55.70 each, 72–143 pieces $53.78 each, 144–5,000 pieces $51.99 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Digital Print — d4 (Digital Four Color Process) (one-time setup $65.00 · Full color); Laser — laserX (branded) (1 location included · one-time setup $65.00); Laser — laserX (branded) (one-time setup $65.00); Screen Print (1 color/location included · one-time setup $65.00 · Up to 24 colors); Digital Print — 360 Wrap (one-time setup $65.00 · Full color); Laser — 360 Wrap (one-time setup $65.00).
From our decoration and product guides
- What is digital full-color printing?
- Digital printing sends the artwork straight from file to the item with no plates or per-color screens, laying every color down in a single pass. It carries photographs, gradients, drop shadows and dense multi-color artwork at high resolution, reading as a flat image on the surface, and holds fine detail and small type cleanly. More about Full Color →
- Does digital printing match Pantone colors exactly?
- A specific brand color is rendered as a close full-color process simulation rather than an exact spot ink, and on colored items the substrate shifts the appearance. Digital printing is the right choice when the artwork is photographic, has gradients or carries more colors than clean solids can capture. When a brand color must reproduce as an exact, edge-to-edge solid, choose screen print. More about Full Color →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: ETS0001873IN STOCK
SKU: ETS0001873
Fellow Carter Cold Tumbler 20 oz
Starting At$51.99each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!