Key Facts
- High-density polymer construction — provides strength and corrosion resistance.
- Pluck foam — included in the case.
- Pressure relief valve — included.
- Padlock holes — provide additional security.
- O-ring and secure latches — prevent water and moisture damage.
- Dimensions — 18 x 14 x 7 in external; 17 x 11.5 x 6 in internal.
Description
The 18-inch hard shell equipment case has high-density polymer construction, pluck foam, a pressure relief valve and padlock holes for additional security. An O-ring with secure latches prevents water and moisture damage.
External dimensions are 18 x 14 x 7 in; internal dimensions are 17 x 11.5 x 6 in. Laser decoration is available. Engraved colors can vary from case to case based on plastic composition.
Specifications
| Origin | Imported, decorated in USA |
|---|
Decoration & Imprint
1 method
Laser decoration is available.
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
approx. 5 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: approximately 5 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 1 piece with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 1–9 pieces $80.36 each, 10–49 pieces $77.59 each, 50–99 pieces $75.00 each, 100–5,000 pieces $71.43 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production typically takes approximately 5 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- How is it decorated?
- Laser (1 location included · no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- Where do I find the dimensions and imprint area of a bag?
- Overall dimensions are listed in the Specifications block when the manufacturer provides them, and the Decoration & Imprint section lists each imprint location with its imprint size where that is known. If a measurement you need is missing from the page, ask us through the Questions & Answers form and we will confirm it with the manufacturer. More about Bags →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SWG0000015IN STOCK
SKU: SWG0000015
18-Inch Hard Shell Equipment Case
Starting At$71.43each, imprint included
Suitable for travel, trade shows and employee kits.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!