Key Facts
- 18/8 stainless steel — durable and resistant to rust and corrosion
- Double wall with copper vacuum insulation — keeps food hot or cold for hours
- Threaded insulated lid — secure seal to prevent leaks
- Silicone base pad — adds stability on any surface
- Powder coated exterior — durable finish that resists scratches
Description
Built for Fresh Meals on the Go
The h2go Essen 16.9 oz thermal food container is crafted from 18/8 stainless steel with double wall construction and copper vacuum insulation. This combination keeps soups, salads, and snacks hot or cold for hours, making it a reliable companion for work, travel, or outdoor activities.
Secure and Stable Design
A matching threaded insulated lid provides a secure, leak-resistant seal, while the silicone base pad adds stability on any surface. The durable powder coated exterior resists scratches and wear, ensuring the container stays presentable through daily use.
Customizable Branding
Your logo can be laser etched into the surface for a permanent, recessed mark that won't fade or peel. This subtle, high-quality imprint keeps your brand visible without compromising the container's sleek appearance.
Specifications
| Brand | h2go |
|---|---|
| Material | Stainless Steel |
| Capacity | 16.9 oz |
| Dimensions | 3.875 in W x 5.25 in H |
| Weight | 0.9 lb |
| Origin | Imported, decorated in USA |
Decoration & Imprint
7 methods
Your logo is laser etched into the front face of the container, creating a permanent, recessed mark in the material's own tone. For full-color or photographic artwork, digital print options are also available, including a 360 wrap for full-body coverage.
laserX+one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
laserXone-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
foilone-time setup $100.00 · Full color
Foil stamping (hot stamping) presses a thin metallic foil onto the surface with a heated metal die, bonding it where the die makes contact and leaving a shallow pressed-in impression. The mark reads as a single reflective metallic tone: it throws light at some angles and darkens to an outline of itself at others, giving the logo depth against the base. Solid shapes and bold lettering hold cleanly; very fine lines and small text can soften as the foil seats under pressure.
d4 · Digital Four Color Processone-time setup $65.00 · Full color
D4 prints CMYK artwork directly onto the item and finishes it with a clear protective coat, giving the full-color image a subtle raised, tactile dimension. It reproduces photographs, gradients, and multi-color artwork with fine detail. Spot colors are not available on this process — color is a full-color blend that comes close to brand references rather than matching exact spot inks.
screenprint1 color/location included · one-time setup $65.00 · Up to 24 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
laserX360one-time setup $65.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
d4/360one-time setup $65.00 · Full color
The 360 wrap prints full-color artwork around the entire circumference of the item in one continuous pass. Photographs, gradients, patterns, and multi-color designs carry seamlessly around the body, reading as a flat, high-resolution image. Color is a full-color process blend that comes close to brand references rather than matching exact spot inks.
Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location, one-color imprint. It may increase for multiple imprint locations, additional colors, and large product quantities. Add 24 hours for your free digital proof.
- FedEx Ground shipping.
Arrival dates are shown at checkout.
Quick answers
Minimums, pricing, setup, turnaround and decoration
- What is the minimum order quantity?
- The minimum order is 48 pieces with screenprint.
- How much does it cost per unit?
- Pricing falls with quantity: 48–71 pieces $14.45 each, 72–143 pieces $13.96 each, 144–5,000 pieces $13.49 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $65.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- laserX+ (one-time setup $65.00); laserX (one-time setup $65.00); foil (one-time setup $100.00 · Full color); d4 · Digital Four Color Process (one-time setup $65.00 · Full color); screenprint (1 color/location included · one-time setup $65.00 · Up to 24 colors); laserX360 (one-time setup $65.00); d4/360 (one-time setup $65.00 · Full color).
Questions & Answers
Ask about sizing, imprinting or turnaround
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: ETS0001785IN STOCK
SKU: ETS0001785
h2go Essen 16.9 oz Thermal Food Container
Starting At$13.49each, imprint included — one-time setup charged separately
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!