Key Facts
- Stainless steel with copper lining — durable outer and inner construction for reliable temperature retention
- Powder coated finish — provides a sweat-resistant, textured exterior that stays dry
- Keeps drinks hot or cold for hours — copper-lined insulation maintains beverage temperature
- BPA-free and meets FDA requirements — safe for everyday food contact
- Fits most cup holders — designed for on-the-go use with a closed lid included
Description
The OtterBox® Elevation® Core Colors tumbler is built with a stainless steel outer and inner body, lined with copper for superior insulation. A powder coated finish adds a sweat-resistant, textured grip that stays dry in hand, while the closed lid helps prevent spills. The tumbler keeps drinks hot or cold for hours, making it a reliable companion for commutes, road trips, or desk-side hydration.
Specifications
| Brand | OTTERBOX |
|---|---|
| Material | Stainless Steel |
| Capacity | 16 oz. |
| Dimensions | 7.1" H |
| Weight | 1.00 lb |
| Care | Hand wash recommended |
| Origin | Imported, decorated in USA |
Decoration & Imprint
2 methods
Your logo is pad printed onto the tumbler's surface, applying up to four colors of opaque ink that conforms to the curved body for crisp detail. Alternatively, laser etching creates a permanent, recessed mark in the stainless steel's own tone. Pad printing is best for fine lines and small text on curved surfaces, while laser etching excels with single-tone logos and dimensional marks.
Pad PrintPMS1 color/location included · one-time setup $40.00 · Up to 1 color
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Laserone-time setup $100.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
10 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 10 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 12 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 12–13 pieces $43.66 each, 14–23 pieces $42.26 each, 24–47 pieces $40.95 each, 48–71 pieces $39.14 each, 72–5,000 pieces $37.50 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $100.00 per order.
- How long does production take?
- Production takes 10 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Pad Print (1 color/location included · one-time setup $40.00 · Up to 1 color); Laser (one-time setup $100.00).
From our decoration and product guides
- What is pad printing and what does it look like?
- Pad printing (tampography) transfers ink from a silicone pad onto the item, so the pad flexes into curves, angles and recessed areas that a flat application cannot follow. The result is a thin, nearly flush ink layer with well-defined edges. Each color prints as an opaque spot-ink solid that holds evenly on contoured or darker surfaces, and the cured ink resists everyday wear. More about Pad Printed →
- When should I choose pad printing over screen printing?
- When the artwork has fine lines, small text or tight detail that must stay sharp on a contoured or uneven surface, such as a pen barrel or a curved drinkware wall. The conforming pad holds crisp edges where flat methods cannot reach. Pad printing suits fine detail better than flooding large areas, so for broad solid fills, photographs or gradients look at screen printing or a full-color process instead. More about Pad Printed →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: HTP0012393OUT OF STOCK
SKU: HTP0012393
OtterBox® Elevation® Core Colors 16 Oz. Stainless Steel Tumbler
Starting At$37.50each
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!