Key Facts
- Copper-lined vacuum insulation — 9X heat retention keeps drinks at temperature longer
- Leak-proof locking lid — push-button closure with a visual open/close indicator
- Lead-free construction — vacuum seal is lead-free for safe daily use
- Powder-coated body with silicone band — durable finish with a comfortable, secure grip
- Packaged in a drawstring pouch — protects the tumbler and simplifies distribution
Description
The Persona Wave Trail Vacuum Tumbler is built from dual-wall 18/8 stainless steel with a copper-lined deep-draw liner, delivering 9X heat retention through vacuum insulation. The lead-free vacuum seal and leak-proof screw-on lid with a visual push-button locking closure make it safe and convenient for daily use. A lip groove lets you position the drinking spout without looking, and the lid comes apart for easy cleaning.
A powder-coated body with a silicone band accent provides a durable, comfortable grip. The tumbler is available with accent bands in a wide range of colors, allowing you to match your brand palette. Each tumbler ships in a drawstring pouch, keeping it protected and ready for gifting or distribution.
Specifications
| Brand | Persona |
|---|---|
| Material | 18/8 Stainless Steel, Copper-lined |
| Capacity | 14 oz |
| Dimensions | 2.75" W x 2.75" D x 8.25" H |
| Weight | 0.71 lb |
| Care | Hand wash only |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your mark is placed on the bottom of the tumbler's side. Laser etching creates a permanent, recessed mark in the material's own tone. Screen printing applies up to six crisp, opaque spot colors. Heat transfer — full color lays down photographic, multi-color artwork with smooth gradients on a thin bonded surface layer.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default full-color imprint in one location. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Heat Transfer — Full Color.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $18.20 each, 48–95 pieces $17.58 each, 96–243 pieces $16.99 each, 244–5,000 pieces $16.18 each. Prices are per unit, imprint included — one-time setup charged separately.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order. The imprint itself is included in the unit price.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Laser (one-time setup $60.00); Screen Print (1 color/location included · one-time setup $60.00 · Up to 4 colors); Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Heat Transfer — Full Color (one-time setup $60.00 · Full color).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- What does a screen-printed logo look like on a promotional product?
- Screen printing presses ink through a fine mesh stencil, one pass per color. Each color lays down as its own premixed spot ink, so the mark is flat, opaque and consistent across the run, with crisp edges that sit on top of the material. On heavy coverage you can feel a slight raised texture where the ink builds up, and the cured ink holds up to repeated handling and washing. More about Screen Print →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0001206IN STOCK
SKU: SAE0001206
Persona Wave Trail Vacuum Tumbler, 14 oz
Starting At$16.18each, imprint included — one-time setup charged separately
A natural choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!