Key Facts
- Copper-lined vacuum insulation — maintains optimal drinking temperatures
- Dual-wall stainless steel — sweat-free design keeps hands dry
- Lead-free vacuum seal — safe for everyday drinking
- Non-slip silicone grip — textured band for a secure hold
- Thumb-slide push-on lid — prevents spills and keeps drinks hot or cold longer
- Durable powder-coated finish — resists wear and scratches
Description
The Urban Peak® Bondi Vacuum Tumbler holds 12 oz in a dual-wall stainless steel body with copper-lined vacuum insulation. The lead-free vacuum seal and sweat-free design keep drinks at the right temperature without condensation on the outside.
A thumb-slide, push-on lid helps prevent spills, while the non-slip textured silicone hand grip provides a secure hold. The durable powder-coated finish stands up to daily use.
Specifications
| Brand | Urban Peak |
|---|---|
| Material | Stainless Steel |
| Capacity | 12 oz |
| Dimensions | 3.25" W x 3.375" D x 4.75" H |
| Weight | 0.63 lb |
| Care | Hand wash only |
| Origin | Imported, decorated in USA |
Decoration & Imprint
4 methods
Your mark is applied to the bottom front of the tumbler. Heat Transfer — Full Color lays down photographic, multi-color artwork with smooth gradients and crisp edges on a thin bonded surface layer. Laser etches into the surface itself for a permanent, recessed mark in the material's own tone. Screen Print pushes ink through a mesh stencil onto the surface, leaving crisp, opaque color artwork that sits right on top of the material.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Screen Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Screen printing presses ink through a fine mesh stencil, laying down each color as a separate pass. Each color lays down as its own premixed spot ink, printing solid and consistent across the run. The applied mark is flat and opaque, sitting on top of the material with crisp edges; on heavy coverage, you can feel a slight raised texture where ink builds up. The cured ink is durable and holds up to repeated handling and washing.
Heat Transfer — Full Colorone-time setup $60.00 · Full color
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $16.06 each, 48–95 pieces $15.51 each, 96–243 pieces $14.99 each, 244–5,000 pieces $14.28 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Laser (one-time setup $60.00); Screen Print (1 color/location included · one-time setup $60.00 · Up to 4 colors); Heat Transfer — Full Color (one-time setup $60.00 · Full color).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002458IN STOCK
SKU: SAE0002458
Urban Peak® Bondi Vacuum Tumbler, 12 oz
Starting At$14.28each
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!