Key Facts
- Copper-lined vacuum insulation — deep-draw liner maintains optimal drinking temperatures 7X longer
- Dual-walled stainless steel — lead-free vacuum seal with a durable powder-coated finish
- 3-in-1 convertible design — transitions between tumbler, can cooler, and bottle cooler with two included lids
- Sweat-free exterior — prevents condensation on the outside surface
- Includes drawstring pouch — protects the mug during transport and storage
Description
The Urban Peak® 3-in-1 Hassler Vacuum Mug is built from dual-walled stainless steel with a copper-lined, vacuum-insulated deep-draw liner that keeps drinks at the right temperature up to seven times longer than a standard mug. A lead-free vacuum seal and durable powder-coated finish give it a clean, modern look that holds up to daily use.
This mug adapts to the moment: use it as a standard tumbler for poured drinks, snap on the rubberized ring to hold a 12 oz can, or fit a 12 oz bottle for a secure cooler. Both lids—a clear thumb-slide push-on lid and a black push-on can/bottle ring—attach at the same time so you can switch modes without losing a piece.
The sweat-free design keeps hands and surfaces dry, and the included drawstring pouch makes it easy to carry or store. Hand washing is recommended, and the mug should not be submerged for extended periods.
Specifications
| Brand | Urban Peak |
|---|---|
| Material | Stainless Steel |
| Capacity | 12 oz |
| Dimensions | 6.25" H x 3.25" W x 4.75" D |
| Weight | 0.92 lb |
| Care | Hand wash only; avoid submersion for extended periods |
| Origin | Imported, decorated in USA |
Decoration & Imprint
3 methods
Your mark is placed on the top of the pouch. Heat transfer applies a full-color photographic layer with smooth gradients and crisp edges. Laser etching creates a permanent, recessed mark in the material's own tone. Pad printing lays down up to four opaque spot colors that conform to the surface for fine detail. For artwork with photographic or gradient-rich designs, heat transfer is the best route; for single-tone logos or fine line work where permanence matters, laser etching is ideal; for tight detail on curved surfaces, pad printing holds crisp edges.
Heat Transfer — Full ColorFull-color imprint · 1 location included · one-time setup $60.00
Full-color transfer heat-applies a printed film directly onto the item, bonding it as a thin, smooth surface layer. It reproduces photographic imagery, multi-color artwork, and continuous gradients — capabilities solid spot-color methods cannot match. The finished mark reads as a flat, slightly filmic layer with a subtle sheen at the surface boundary; its strength is color complexity, tonal shading, and fine detail.
Laserone-time setup $60.00
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Pad Print1 color/location included · one-time setup $60.00 · Up to 4 colors
Pad printing (tampography) transfers ink from a silicone pad onto the item, flexing into curves, angles, and recessed areas flat application can't follow. The result is a thin, nearly flush ink layer with well-defined edges — each color prints as an opaque spot-ink solid, holding evenly on contoured or darker surfaces; cured ink resists everyday wear.
Production & Delivery
3 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 3 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 24 pieces with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 24–47 pieces $19.28 each, 48–95 pieces $18.61 each, 96–243 pieces $17.99 each, 244–5,000 pieces $17.13 each. Prices are per unit.
- Is there a setup charge?
- Yes — a one-time setup charge of $60.00 per order.
- How long does production take?
- Production takes 3 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork.
- What decoration methods are available?
- Heat Transfer — Full Color (Full-color imprint · 1 location included · one-time setup $60.00); Laser (one-time setup $60.00); Pad Print (1 color/location included · one-time setup $60.00 · Up to 4 colors).
From our decoration and product guides
- What is a heat transfer imprint?
- Heat transfer prints the design in premixed spot inks onto a film, then bonds that film to the surface under heat and pressure. Each color goes down as its own solid ink, so edges stay crisp and color stays even across the mark. The result is a smooth, thin bonded layer that flexes with the material rather than ink soaked into the cloth. More about Transfer →
- Can heat transfer print photographs or gradients?
- Standard heat transfer prints spot colors as flat solids, so photographic art, gradients and tonal blends are not a fit; those need a process-color transfer, which many products list as a four-color or full-color transfer option. Very small text and hairline elements may also soften slightly at the bonded edge, while crisp lines and fine solid detail hold well. More about Transfer →
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SAE0002248IN STOCK
SKU: SAE0002248
Urban Peak® 3-in-1 Hassler Vacuum Mug, 12 oz
Starting At$17.13each
A practical choice for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!