/cv-details-size/media_49862288.webp)
Key Facts
- Double-wall stainless steel — a second wall separates the can from your hand
- Copper lining — an inner layer of copper sits behind the stainless wall
- Fits standard 12 oz cans — sized for the everyday soda can
- Laser etching holds fine lines — the focused beam cuts sharp, clean edges
Description
This 12 oz soda holder is built as a double-wall stainless steel sleeve with a copper lining, sized to fit standard 12 oz soda cans. The two-wall construction puts a layer of metal and an inner copper lining between the can and your hand, so the holder stays comfortable to grip while the can is in use.
Laser etching marks the stainless surface itself, cutting a permanent, recessed imprint in the metal's own tone with no added ink. Because the beam etches sharp, clean edges, single-tone logos, fine line work, and small text hold their detail on the finished holder.
Specifications
| Origin | Imported, decorated in USA |
|---|
Decoration & Imprint
1 method
Your mark is laser etched into the outer wall of the holder, burned below the surface for a permanent, recessed imprint that carries no added color.
Laser1 location included · no setup charge
Laser engraving uses a focused beam to etch your design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges that hold fine lines and small text. The result carries no separate ink: it reads in the substrate's own tone — a lighter shade on metal, a darker burn on wood — with a depth you can feel and a mark that resists fading, wear, and scratching.
Production & Delivery
6 business days production
- Free digital proof — within 24 hours. After we receive your artwork, we will e-mail you the proof. Production time begins after your approval. We allow up to two proof edits at no additional charge.
- Production: 6 business days after proof approval. Production time is for the default single-location imprint. It may increase for multiple imprint locations and large product quantities. Add 24 hours for your free digital proof.
- FedEx Shipping: Transit time depends on the shipping option and destination. Enter your ZIP code below for estimated arrival dates and shipping prices.
- 48-Hour Rush production is available for $39.00 per order. Your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
Arrival dates are shown at checkout.
Questions & Answers
Ask about sizing, imprinting or turnaround
- What is the minimum order quantity?
- The minimum order is 1 piece with Laser.
- How much does it cost per unit?
- Pricing falls with quantity: 1–24 pieces $14.28 each, 25–99 pieces $13.79 each, 100–249 pieces $13.33 each, 250–499 pieces $12.70 each, 500–5,000 pieces $12.12 each. Prices are per unit, imprint included.
- Is there a setup charge?
- No setup charge.
- How long does production take?
- Production takes 6 business days after proof approval; a free digital proof is e-mailed within 24 hours of receiving artwork. 48-Hour Rush production is available on this item for $39.00: your order goes to production the business day you check out with artwork by 12:00 PM CT — no digital proof to approve.
- How is it decorated?
- Laser (1 location included · no setup charge).
From our decoration and product guides
- What does laser engraving look like on a promotional product?
- Laser engraving uses a focused beam to etch the design directly into the surface, leaving a permanent, recessed mark with clean, sharp edges. There is no ink: the mark reads in the material's own tone, a lighter shade on metal and a darker burn on wood, with a depth you can feel. It resists fading, wear and scratching because nothing sits on top of the surface. More about Laser →
- Can laser engraving be done in my brand color?
- No. Engraving carries no added color and shows only the substrate's own tone, so a design that depends on brand colors, color contrast, gradients or photographic detail is a poor fit. It is the right choice for single-tone logos, fine line work and small text where a permanent, dimensional mark matters more than color. For printed spot color choose pad print or screen print. More about Laser →
- How does rush production work at Promotion Pros?
- Your deadline is the production clock. When you order rush, the countdown starts the moment you check out with print-ready artwork, not after a digital proof is approved. Most suppliers will not start the clock until a proof is signed off, which quietly adds days to a fast-turn promise; a rush order goes to production immediately, so the turnaround you pick is the turnaround you get. More about Rush production →
Customer Reviews
No product reviews yet
No product reviews yet for this item.
SKU: SWG0000047IN STOCK
SKU: SWG0000047
12 oz Insulated Stainless Steel Soda Can Holder
Starting At$12.12each, imprint included
A practical pick for employee gifts, client gifts, and company events.
Chat with or Call Our Friendly Wisconsin Staff
Questions about uploading artwork? Or pricing, options, process, or anything else? Use the live chat on the lower right of this page, or call us at 1 (844) 667-7666 during office hours to speak to a friendly, helpful professional. Promotion Pros is a family-owned business in West Bend, WI with a decades-long history supporting businesses locally, regionally, and nationwide. You'll always get a helpful professional if you reach out for support — never a robot!